starter

Hello, I drive a Mazda cx5 recently did an engine replacement due to a blown motor. Everything is good it was starting now it’s not… I was looking and the starter wire snapped. any solutions on how to fix it without buying a new wiring harness? 2016 Mazda cx5 grand touring 2.5L

Hi, I am wondering if anyone have install one on on their 2017+ model year that would like to shine some light on the process? I bought one through Ebay after doing my research but the information is almost non existence...

Hello, I am new to engine replacements, and am replacing my USDM FS engine with a JDM FS motor. It is a 2.0L with an automatic transmission. I have had numerous issues along the way, but finally got it started only to hear an awful constant screech. I determined that my starter (from the old...

Does anyone have any clear pics of their starters ON their car still? I can't quite remember how the wiring goes, and im afraid of wiring something wrong and popping a fuse or messing something up. There's the short black wire on the starter motor that i assume just connects to the starter...

[2001 mazda mp3] I figured out the issue with why all my electronics were going off (backwards battery - im stupid) -So my new issue is the engine won't turn. Is this because I re-filled all fluids and oils, so maybe it wont turn because it hasn't been fully lubricated? Or is the battery too...

Looked into just about everthing to see why I was getting rough idle and stalling hot or cold for first few minutes after every start. Just finished replacing the fuel filter/strainer in the tank, when I went to start the car I got slow rotation of starter, burning smell, then tell tail "tick"...

Well here goes. I have an '05 Mazda3 2.3L 5spd. At 96K my motor blew (regular maintenance etc, etc). Replaced crank and No. 1 piston assembly. After getting everything back in car, will not start. 1. Engine turns over by hand easily with a 3/8" ratchet. 2. Wiring harness was compared and is...

Hello folks, I need so advice as to what my be causing my problem. I have a 2003 Progete5 Sportronic. In February 2012, I was visiting my folks in San Diego when my starter died. Called a mobile mechanic and got the starter replace. Since then the car has been fine. One cold morning in...

Whenever i start the car with the engine warm it takes about 5-8 seconds to start the car. cold starts only take a second. why is that? i havent cleaned the egr yet and my intake hose has many cracks and air filter needs replacing. could this be the problem. could it be the starter?

Yesterday I got a call from my wife saying she was stranded at the shops because the car wouldn't even attempt to start. Dash lights come on, air blows, music plays, does not start. Incidentally the closest auto service was the Mazda dealer across the street. We towed it there and got the...

hey everyone! i own a 2006 mazda 3 i 2.0 and i am interested in installing a push button starter in my car, so i got a few questions :) has anyone done it yet ? if you have, could you show me some pics and give a brief explanation on how yah did it? where did you buy your switch, and brand...

I took apart the EGR yesterday. Soaked it with a carbon cleaner overnight and put everything back together. I know I attached all the wires. Turned the key and all I hear is a clicking sound. The battery leads are free of corrosion because I just cleaned them also. Lights and radio are...

Hey Mods, please put this in the correct area. Thanks. All, (*this is Sanblasters' brother*) I bought a 2010 mazda 3i and it came on the low end with accessories (just auto windows). I took it to a local shop to get automatic locks and a starter installed, and was told they have problems...

For Sale: 1) OEM Mazda , Mz3 remote starter kit. Never installed, all the parts are hereapparently gotten lazy. PART# 0000-8f-L10a asking $100 shipped 2) I have done an HID conversion on my 3, but in the purchasing of parts ended up with 2 brand new ignitors that I dont need. These connect...