sensor

  1. Y

    2007~2015 CX-9 front glass with sensor replacement help

    Hi all., after using my wonderful CX-9 2013 car (higher end) in desert areas i found out that the front glass is little frosted, the damages are all over the front the glass.it is very clear when driving facing the sun. im wondering how to replace the Glass while there is a sensors in the...
  2. P

    Looking to replace an O2 sensor. needing help.

    I am new to these forums and I am trying to figure out how to navigate them (on my phone...no pc), so forgive me if this has already been addressed. I feel somewhat confident in my abilities working on my cars as I do most routine basic maintanance. But money is tight, and I need to replace (I...
  3. P

    Knocking/Pinging with 87 Octane Gas

    Hi I have a 2000 Mazda Protege LX with the (1.6L DOHC) ZM-DE engine, and since it was new, I detected a noise at aprox. 2,400 rpms in 2nd gear, at that time my father was the owner and he at the next fill up he refilled with 93 Octane Gasoline and the noise disappeared, now i have that car and...
  4. I

    Reversing Radar ou Parking Aid

    First of all, sorry for my english I'm french, my english and google translation does not necessarily give the right words. Summary of my problem. The Parking sensors not working. No beeps when crossing the reverse. Reminder operation of reversing radar : 1 case / 4 Sensors / 1 Buzzer / 1...
  5. R

    Changed Oil Pressure Sensor- Now Fails to Start

    Hey there! Any advice or tips would be appreciated. Changed out my oil pressure sensor because it was leaking real bad. Got a new one from part source and swapped it out. Now she won't even turn over. I turn the key and i just hear a click come from somewhere in my dash. It's a 1.6L 2001 protege.
  6. D

    Does anyone know how to fix a Mass Air Flow Sensor????

    I'm thinking no one will but I think it's worth a shot to ask and yes I've searched. I don't want to buy a used one because it could go bad any time and a new one is over 300 bucks.
  7. K

    Replacing O2 Sensor

    Hey I recently got a P0031 check enginde code which refers to overheating in bank 1 sensor 1. So I wasnt sure exactly which oxygen sensor this was, is this the one right on the front or underneath the car? Also I was trying to unplug the oxygen sensor and the actual electrical plug is so hard...
  8. M

    knock / detonation sensor

    is leaking oil... for reference this is the sensor a few inches above the oil filter on the back of the block. I see a bit of oil drip on the black cable that connects to the silver bolt. there is also some black goopy stuff on it. can i just take this sensor out and fix the leak then put it...
  9. B

    ect sensor location?

    My check engine light came on and I got it checked out and was told I need to change my sensor or thermostat. I'm pretty sure its my sensor so I'm changing that out. But could someone post where exactly its located? thanks
  10. D

    01 tri where is the oil pressure switch located?

    Can't seem to find the oil pressure switch on the mazda tribute 2001,thought it would be the motor oil opening but nope,then i thought by the oil filter but nope,now im thinking maybe on the oil pump but i really don't have a clue...help me
  11. T

    ABS sensor code 14

    I tripped the ABS and brake lights, so I ran the codes and got 14 and 48. Pulled the LR sensor, cleaned it, which got rid of the 48 code, but not the 14. I have never seen only one code go through (usually they're in pairs for each corner). Any ideas on what might be causing the 14 to stick...
  12. M

    Trouble shooting O2 sensor?

    My Car 2002 P5 145 xxx km Standard and stock I have a P0421 code and sometimes at idle my car will drop below 500 rpm if you give it gas its okay. I believe the computer is not controlling the air/fuel mixture properly. My manual says thats its the O2 sensors (loose or malfunctioning... they...
  13. A

    Transmission temp sensor placement

    Hi there everyone, I have an Autometer temp sensor gauge. I was thinking about doing a whole transmission pump and cooler setup from NSN but have scaled back that plan (along with a few others) in terms of modding the car. Now, I just want to somehow place the sensor so it will read the...
Back