seals

  1. 6

    Remove oil seal retainer to install rear main seal?

    Doing a clutch job, I decided to replace the rear main seal. When I was putting the seal in, it went in crooked and got stuck. I had to destroy the seal in order to yank it back out. So I'm going to try again with a new seal. But it looks like it would almost be easier to remove the oil seal...
  2. M

    Still smoking after new valve stem seals

    Like a lot of us on here, I've been having the blue smoke on start up and it stops after about/around 30 seconds. I started with compression and leak down test and both were flawless. I replaced the OEM stem seals with Viton stem seals and triple checked everything went on perfect. I didn't mix...
Back