motor mounts

Hi All I just bought this 2012 CX9 last night and noticed that it had some inconsistency when shifting at 35-45 mph in stop and go traffic. I also noticed a clunking sound when hitting sharp bumps. My question is can both of these issues be caused by worn motor mounts. The attached video is the...

https://corksport.com/rear-motor-mount-poly-inserts-2019-mazda-3-and-cx-30.html Looking to upgrade to a stiffer Rear Motor Mount to reduce engine movement and get more feedback and don't want to trade the extra performance for an additional increase in NVH? If that is you, the CorkSport RMM...

2006 Mazda mazda5 Idles hard when in reverse or drive but goes away after sitting in gear for a minute, Shift fine except when going 50 and passing 4th to 3rd is fine but it shift down to second and jumps, signs im seeing is torque converter but before i get to anything like that any ideas of...

Hey everyone, Ive got an 07 mazda 3s, and almost at 200k. I have this noise that I believe to either be a bad strut in the front right or motor mount... the mounts are not broken but the rubber lining? I guess? Is starting to crack. I have a lot of engine noise in the right side of the cabin...

I need to finally tune my msp and i need to swap out the 80 duro awr motor mounts. To many vibrations in cabin with baby on the way and fiancee is getting annoyed is with it...boooo(boom07)

I have a 2012 Mazda5 Sport automatic with 83,000 miles. I believe my engine and transmission mounts may be bad. I found a company that sells all the 2010 mounts in one set at a very reasonable price, but I can't find anyone who does that with 2012 and up. It is my understanding that the 2.5...

Hey Mazda Family, So, I believe that my passenger side motor mount needs to be replaced. I notice that the engine are is making a loud vibrating, growling kind of noise when I turn the engine on and it gets louder when ever I accelerate while making right turns only! I was wondering if any of...

Anybody recommend a good source if there are no owners with the parts to sell? I'm asking around, but with little luck. If need be, I'll consider buying them new.

Like title says my passenger motor mount is out for sure, probably the others as well and i think i'll just replace all 3. I'm not heavy into performance mods or anything just want something that will end vibration, last a long time, and not super expensive. So what do you guys recommend? I...

Ok I bought her like 6 months ago and she's had a few issues and I've slowly been fixing things here and there as my budget allows... I would really like to fix this current bothersome issue... What happens is when I let the throttle go, even if I let off the gas very slowly the car jerks...

I'm having my local mechanic replace my stock motor mounts after he pointed out that the sides and rear mounts are ripped. He says I need to buy the OEM mounts, but the Mazda parts are just too pricey compared to the aftermarket types out there. I'm contemplating getting a set from Pep Boys...

selling my brand new NEVER before installed motor mounts... looking to at least make most of my money back for them while still saving you a couple pennies :) all prices are OBO and are based on prices from AWR's site... paypal is the only way i will recieve payments and they will be shipped by...

Anyone have the corksport motor mount inserts? any good? comments, opinions greatly appreciated.

I used this mount for a few months then swapped out for the stiffer TRZ rear mount. I sent it back to CP-E and had a new 60A duro bushing put in so it is like new. Here's the link to the actual product on their page for more info...

i really need some motor mounts!!!! all 4 are shot and would like to see who all has some for sale... i would prefer 70 duro AWR's but at this point i would take any also i need fmic piping (both sides) i figured i come here first to see if i can get some quality used parts for not to much...

Looking for the above from any 2L manual protege in good condition! Thanks!

looking for stock REAR engine mount for 3rd Gen manual transmission, 2.0L engine, by the firewall Mazda part number BL3K-39-040 willing to take 2 used RR-Racing rear motor mount inserts as well. Number 7 in the photo below also if anybody has the lightweight Mazdaspeed chromoly flywheel...

AWR (70 durometer) engine mounts from my 2002 Protege. I have the transmission & passenger side mounts. These have been used for around 1500 miles and are in very decent shape. They have slight wear n the silver paint from shipping and use but the poly inserts are perfect . I just sold the...

Ok, getting ready to buy some engine mounts and am wondering what to go with? The car isn't a track car, more interested in lower vibration than ultimate performance. I've seen the AWR . . . what are the other options out there?

Looking for an stiffer transmission mount, 88 durometer or higher. Must be willing to ship to Canada. Thanks.