motor mount

  1. C

    *new to this* possibly motor mount or strut..?

    Hey everyone, Ive got an 07 mazda 3s, and almost at 200k. I have this noise that I believe to either be a bad strut in the front right or motor mount... the mounts are not broken but the rubber lining? I guess? Is starting to crack. I have a lot of engine noise in the right side of the cabin...
  2. A

    2010 Engine/Transmission Mounts on a 2012

    I have a 2012 Mazda5 Sport automatic with 83,000 miles. I believe my engine and transmission mounts may be bad. I found a company that sells all the 2010 mounts in one set at a very reasonable price, but I can't find anyone who does that with 2012 and up. It is my understanding that the 2.5...
  3. M

    WTB: All 4 motor mounts, used or new and rear struts. Looking for a good deal.

    Anybody recommend a good source if there are no owners with the parts to sell? I'm asking around, but with little luck. If need be, I'll consider buying them new.
  4. R

    Need new MOTOR MOUNTS bad, ASAP

    Like title says my passenger motor mount is out for sure, probably the others as well and i think i'll just replace all 3. I'm not heavy into performance mods or anything just want something that will end vibration, last a long time, and not super expensive. So what do you guys recommend? I...
  5. M

    Motor mounts.

    Anyone have the corksport motor mount inserts? any good? comments, opinions greatly appreciated.
  6. J

    CP-E Rear Motor Mount

    I used this mount for a few months then swapped out for the stiffer TRZ rear mount. I sent it back to CP-E and had a new 60A duro bushing put in so it is like new. Here's the link to the actual product on their page for more info...
  7. C

    WTB: Passenger side Motor Mount - Not ripped.

    Looking for the above from any 2L manual protege in good condition! Thanks!
  8. M

    WTB OEM protege MSP stock rear engine mount or RR-Racing rear inserts

    looking for stock REAR engine mount for 3rd Gen manual transmission, 2.0L engine, by the firewall Mazda part number BL3K-39-040 willing to take 2 used RR-Racing rear motor mount inserts as well. Number 7 in the photo below also if anybody has the lightweight Mazdaspeed chromoly flywheel...
  9. D

    AWR Passenger side motor mount - 70 durometer - barely used - $160 shipped

    I bought a set of AWR trans and passenger side mounts in the summer and got around to installing them in September and decided that the inclusion of the passenger side is just a bit too much vibration, noise than I'm willing to put up with. I will miss the lack of engine slop and improved...
  10. O

    WTB: rear motor mount, exhaust, and h&r springs

    Motor mount would need to be CPe or SU (street) Exhaust...I'm open Springs...h&r or other 1.5" d
  11. U

    WTB: Rear Cross-member & Motor Mounts

    WTB: Motor & Trans. Mounts WTB: All 4 motor/trans mounts: Front, rear, passenger, and driver(transmission) mounts. Would love AWR or other aftermarket mounts, but I am interested in oem mounts as well. Let me know if you have any. I can send paypal asap. Edit* Don't need the rear...
  12. D

    FS: Split Second FTC, Autometer WB, and more...

    Sorry, the WB is sold... (if a mod stumbles across this, they are welcome to change the title to "Split Second FTC and more MSP stuff" or whatever) Split Second FTC, never installed, new in box, software, instructions and protege ECU pinout diagram -- Decided to keep Other items.... most...
Back