grinding

  1. D

    Front End Grinding / Whining noise when braking 2008 CX-9

    Hi guys. Normally have an issue after about 5-10 minutes of driving. When coming to a stop the noise start to appear at around 20km/hr. My last service was told that my discs need machining however the noise sound more mechanical like a grinding diff or something. About 180,000 ks on the clock
  2. M

    Safe to drive if brakes are making noise?

    Hi! I drive a 2008 Mazda 3 and this morning on my way to work I had to make a sudden stop and when I did my brakes made a very loud grinding noise. This noise than continued as I made it the rest of the way to work. I'm planning to bring it in when I get off work, but I just want to make sure...
  3. T

    Grinding, rubbing, whirring noise coming from transmission after replacing clutch

    As the title says, I am getting a grinding noise coming from the transmission area after I replaced the clutch, flywheel, rear main seal, and axle seals. It has gotten progressivily worse and isnt tied to the Engine because it varies by car speed not engine RPM. Also the noise gets worse when...
  4. E

    Rebuild Transmission-Ran it dry

    The LH output shaft seal was leaking. I thought I had time to wait for my pope mani to come in to replace the seal, mani, and install a new timing belt all at once. I was wrong. Yes, I understand it was stupid not to periodically check fluid level knowing there was a leak. Started the car one...
  5. B

    Brake grinding noise when cold

    2012 Mazda5 Sport 6MT. For the first couple of minutes in the mornings, it sounds like there is some grinding noises coming from the front brakes. This goes away after a couple of stops. Pad wear is minimal with plenty of life left, and the rotors are in fine shape. Is this just from the OEM...
  6. A

    Please help, Started taking off and grinding noise! Transmission/Cv joint???http://ww

    I was going down my road today and just put new plug wires on my MSP, I stop at a stop sign and go to accelerate pretty rapidly, I got to about 4k rpm and the car felt like it slipped out of first gear, not thinking nothing off it ( thought it was a one in a million thing, never happens ) went...
  7. Z

    Brake Grinding? Braking, clutch down, changing gears/neutral, and vibration in brake

    I haven't really found anything on this very specific, but very obvious, issue I've noticed in my 2011 Mazda2 Touring MT (~56K). I first noticed it a while ago, predominantly when coasting downhill, foot on the brake and clutch and I hit a bump. At that exact moment, it almost feels like the...
  8. S

    Is this a syncro problem?

    so, i replaced the crap transmission in my 2002 Protege ES 2.0 with a rebuilt one. however, now i have a terrible problem of he car grinding in to every gear. every time i shift i have to go really slow, or else grind the gears. I'm wondering if this is a problem with the transmission, or could...
  9. J

    Grinding noise when coasting

    I just got back from a 1,000 mi or so road trip and now the front drivers side is grinding/vibrating when coasting at any speed. It doesn't happen when I accelerate or brake. It doesn't feel like a brake issue... help!!
  10. S

    New Member, and I need some diagnostic help

    I have a manual '02 protege5, with just a hair over 100k miles on it. I was on the highway doing 70, right around 3500 rpms and it fell out of 5th gear. The shifter didnt move, but the rpms dropped, I took it of gear and put it back and it worked fine, but the engine light is flashing. I'm also...
Back