egr

  1. 0

    2003 Protege DX 5MT rough idle

    I just bought a 2003 Mazda Protege DX Manual transmission 135k miles and have been having issues with rough idle. At emissions it threw a p0303 CEL light for cylinder 3 misfire. I noticed a small pool of oil near the #3 spark plug boot, took boot out, fair amount of oil on it as well as oil on...
  2. J

    2.2 diesel poor economy

    Morning all, just taken on a 2014 2.2 diesel in an attempt to reduce some running costs from my previous A6. Bit surprised the mpg is no where near the manufacturers guidelines. On previous cars (Mondeo's, A6, Scirocco, golf...) I can fairly easily get and sometimes exceed the quoted figures so...
  3. S

    Rear Windshield Visor for 99-03.5

    Brand New, imported from Taiwan. FSE logo is a sticker and can be removed. $100 + Shipping Image 1-7 is my photos on my car Image 8-9 is examples on a friends car Rear Visor 1 by Brandon Chang, on Flickr Rear Visor 2 by Brandon Chang, on Flickr Rear Visor 3 by Brandon Chang, on Flickr Rear...
  4. J

    WTB: 2002 mazda 626 EGR pipe

    need one from this specific 626 2.0L FS model. must be the complete pipe from Intake to exhaust manifold PM me
  5. B

    EGR rear visor

    Hey everyone, looking to sell my EGR rear visor from the group buy on here and really just want to recoup some of my money. It was only used for around a month or less. Letting it go for 200 shipped. They sold for 220 plus shipping on the group buy and this thing is literally brand new. I will...
  6. C

    HOW TO VIDEO: Remove/Replace EGR Valve

    Hey Everyone, I recently removed the EGR Valve from my 2002 Mazda Protege5 and wanted to make a video that would help others through the process of removing it too. Below is a youtube video where I explain and guide any viewer through removing it. I made some terminology mistakes, but with that...
  7. R

    2.0L performance/power issue

    Hi people! I couldn't find exactly the same issue as mine on the forum so I'll post my question here. I bought a little 2002 Protege ES2.0 (5-speed) here in Alberta about 4 months ago, after I wrote off my VW Golf TDI. So far I have 2000km put on it and little by little it's losing power... I...
  8. K

    Header Install question

    So I have some M2 performance headers coming in this week with a new egr valve. Im very limited on tools, like almost none ha, and havent been able to find the exact tools needed for the job. I think it was 10 mm, 12 mm, and 14 mm socket wrench to remove the bolts, is that right? I also read...
  9. S

    EGR block-off plate question...

    ok i tried finding my answer but couldnt...when you put the block-off plate on does it stop the flow of coolant that comes out of it and into the turbo?
  10. T

    Mazda Protege 5 2003 Not Running Properly

    Hi Guys I have a mazda protege 2003 2.0l with 143,000kms I changed the plugs but it isn't running properly at all. Its very sluggish when pulling away and going uphill it has no power at all and the engine doesn't pull very well. Ive read alot about cleaning the egr valve on this forum and i...
  11. W

    2001 protoge LX 2.0 with EGR issues

    Hope this is in the right area. My wife has a 01 Protoge LX 2.0 and after reading about cleaning the EGR to resolve idle issues thought I would try it. Only the two bolts are severely damaged and the only way off is to cut them. With that being said the car has 230,000Km on it and don't want...
  12. 0

    MS3 floor mats and James Barone Racing EGR block off kit for MS3.

    Floor mats were taken out of a new 2010 MS3 that was being set up for track only. While they can't be classified as new, they look brand new. I was told they will fit all Mazda 3's but make no guarantees. SOLD. EGR block off kit for MSS from James Barone Racing is brand new, never installed...
  13. C

    cleaned EGR now car won't start :(

    I took apart the EGR yesterday. Soaked it with a carbon cleaner overnight and put everything back together. I know I attached all the wires. Turned the key and all I hear is a clicking sound. The battery leads are free of corrosion because I just cleaned them also. Lights and radio are...
  14. J

    weird EGR valve replacement

    Hello everybody, I'm Jim, obviously new to the forums. I can't believe this has existed for so long and I haven't found it! I have a question about EGR valves on the 2002 Mazda Protege5. I just bought a replacement EGR valve for our Protege5, and the replacement is a bit different than the...
  15. M

    Where is the EGR valve on the MS3

    I`m getting an intermittent CEL for "insuffucient egr flow" or something to that effect. I checked the warranty and the EGR valve is only covered for 24,000 miles. What kind of bulls*** is that? They checked at the store and there is no aftermarket replacement available for it yet. This means...
  16. U

    egr valve

    i got a check engine light. the code is for the egr valve. i want to try to clean it bc these things are not cheap. the cheapest one i have found for a speed3 is $392. can anyone help me to find this on my motor? give me a location. or maybe point me in the direction to where i can find out how...
  17. 1

    How To: EGR Removal and Cleaning for Rough Idle Fix

    A lot of people have complained about the eratic idle the Protege sometimes gets when the clutch is pushed in and rpms are allowed to fall quickly. The idle will jump anywhere from around 200-1100. This problem seems to get worse when the car warms up. My car started stalling everytime I pushed...
Back