bulb

  1. Y

    driver headlight not working, need help

    My 2003 P5 driver side headlight is out and I am wondering what the cause can be. I have already changed out the bulb (not the issue) and have checked the fuses (none of them blew out). Is there anything else I can check to see what my issue is?? Thanks in advanced
  2. D

    Madza3 2008 can't remove headlight wiring harness

    Hi, I have a 2008 Madza3 and I'm trying to replace a low-beam bulb (passenger side). However, I can't get the wiring clip off of the bulb prongs. I've tried pulling hard and wiggling it all directions for 10+ minutes and it won't come off. Is there some kind of lubricant I can use to get this...
  3. I

    sooo... i burned my Dome light ... help please?

    Ok so i just changed my dome light recently to get the color i wanted and the bulbs were a little bigger than the stock ones but they fit and worked so i didn't think anything of it. well... today i mistakenly left them on and they literally melted the housing and the lens cover. now the cover...
  4. B

    Nice Reference guide for lights

    https://www.rvledbulbs.com/v/vspfiles/assets/images/datasheets/performancechart12vincandescentbulbs.pdf
  5. J

    Protege5 low beam issue, fuse and bulb are new/working

    Need some help guys I just did a protege5 headlight conversion on my sedan and I'm having some issues with the low beam The driver side low beam isn't lighting up.. I'm using brand new bulbs so I thought it was the connector pigtail.. I swapped it out and spliced a spare low beam pigtail but...
  6. E

    Headlight beam not straight

    Hi All, I just had the headlight bulb replaced but the beam is not straight like the other one. Is there a way to adjust? Thanks. Eric
  7. J

    Light Bulb Change

    Hi, I'm a 'newbie' to the group so apologies if this has been addressed already. One of my headlamp bulbs is out and as well, my very small, mounted at the outer edge of the headlamp housing, and seemingly impossible to reach, running lights. I had expected to quickly swap them out but it looks...
  8. S

    Trunk/Cargo Lamp Issue (Socket Voltage Changes with Bulbs?)

    I changed all my interior and license plate bulbs to CorkSports' LED ones several months ago. Recently I noticed is that the cargo lamp stays on all the time, regardless the hatch position. When I put the OEM regular bulb back, it does not work at all. So I used my multimeter and here are what...
  9. B

    CAN Bus on 2012 Mazda5?

    I've been looking at replacing a number of light bulbs on my car with LED units, but I see that there are two different types that apparently shouldn't be mixed or interchanged. It seems that there are some design for cars that use CAN Bus architecture, and others that don't use this...
  10. Peloton

    Auto Climate Control light bulb

    Does anyone know what type of bulb this is? Mine burnt out and I can't find the bulb type anywhere.
  11. O

    Fog light bulb for Protege 5

    What kind of light bulbs are in the fog lights for the proteges? 1 of mine blew out. I want to make sure i have the right bulb before i remove the bumper to replace it b/c its a pain in the butt. Oh and where can i get them?
  12. H

    How to remove tail light assembly to change bulb

    I have a 2006 Mazda5. I need to replace the brake light bulb. I have removed the two screws but cannot get the tali light assembly to pull away from the body. I've tried pushing up, pushing down, rocking back and forth. I don't want to break it. It feels like something else is holding it in...
  13. E

    FS: HID retrofit setup, remote starter

    FS: remote starter, mz3 injen cai -all sold Hi, Planning on moving and selling my 3, have the following parts for sale 1. mazda 3 remote starter part3 #0000-8F-L10A - SOLD includes wiring harness, starter 'brain', directions, remotes, zip ties and tap connectors as seen in picture. asking $65...
Back