brake

I have a MY2015, built 3/14. It is a touring model but has AFS, sunroof, etc. In the options, I see the city brake on/off. If I turn it off, a light comes on indicating that it is off. I do have the cluster around the rear view mirror. Last snow it also warned that the brake wouldn't work u...

Hi, Sold my P5 with 205,000! Now for the car I really wanted. 2005 M3, SP23, auto trans - stock everything. Front brakes need replacing: Is there a Big Brake Mod? Clink in the trans changing from park to drive: Motor Mounts? Anything I really need to consider on upgrading? I'm going to...

We just returned from a ~1000 miles trip (500 miles each way). I can tell you it was the most comfortable drive ever with our CX-9 GT. I love it very much so far! However, I noticed that the vehicle produced hissing noise when I applied the brake at the 60+mph after driving little over 100...

I just upgraded my brakes with the Mazda 6 upgrade. If you want to do that too, you can buy these caliper, trade them in fro rebuilt ones and save a lot of bucks on the core charge. Front and Rear Cailpers, Rotors and Brake lines. $75 plus shipping for all You will get ~ $50 credit on the...

I am a new member but longtime Mazda owner. Bought my 2010 Mazda 5 GS new and it's now past warranty. I plan to do the basic maintenance work (brakes, oil, filters, belts etc.) myself. My first job is to replace rear pads and rotors as they are visibly rusted out and no longer flat. I have...

Seized Brake Calipers -- 2002.5 Proteg5 The disc brakes in the Mazda Proteg5 are single-piston floating-caliper design. That means that there's only one piston and it's operating on the inner pad. The reaction slides the floating portion of the caliper the other direction, and it's this...

Hello, First time posting, hope I'll do good :-) I need to replace the brake light (the longer one on the drive side*), not the one into the tailgate, on my CX-5 2014. I'm in Canada, in the Quebec province, anyone had a contact for that ? And second, I've research in the forum and online...

2009 Mazda5 Sport, with the 40k and the original brakes. I've just spent an hour with penetrating oil and hammers (rubber mallet, then 4lb. hammer) trying to take the front brake rotors off. I've got the AllData instructions, and there really shouldn't be anything holding them in place once the...

I've just spent $4,000 getting these items replaced at a local dealer (I'm at 80k so outside of warranty) after complaining for months to dealers about the vibration in my CX9. Dealer was helpful but after Mazda USA refuses to acknowledge or address known issues with tranfer cases, drive shafts...

I have been a Hawk HPS user since my first pad replacement years ago after my original pads worn out. I like the harder grip of the HPS but they are not cheap. I priced a set online and seen them no lower than 55$ for a set of front HPS pads hb211f.606. So now I am unemployed and was just...

Ok, so im fairly new here, but not that new. ive had my car just over a year now, and my rusty calipers are looking pretty fugly now. I upgrade my rotors last fall, and it just makes the calipers look worse by comparisin. i have a couple thoughts and would like to know if anyone has done the...

Looking for a right side JDM tail light. Some goof at work backed into me. Would conceder a set but checking to see if anyone has just the right side first.

So I purchased a set of four new slotted and drilled rotors from R1 concepts and a set of 4 new calipers that I plan to paint red this weekend. I have my mechanic friend installing it all next week some time. So my question is which way are the slots in the rotors supposed to face. It seems...

Got a (hopefully) quick question for the gurus. Just bought a brand new 2012 CX-9 GT. Within 2 hours of purchase the wrench light came on, TCS off light illuminated, and cruise control stopped working. The car had diminished power and inability to accelerate. Dealer says a blown brake fuse...

Got a (hopefully) quick question for the gurus. Just bought a brand new 2012 CX-9 GT. Within 2 hours of purchase the wrench light came on, TCS off light illuminated, and cruise control stopped working. The car had diminished power and inability to accelerate. Dealer says a blown brake fuse...

So Im thinking to change out my rotors and wheel bearings some time when my brake pads start to go bad again. I was going to ask you all what kind of rotors would be the best over oem. I mean i think its not really too necessary for slotted vent discs but im thinking just keep them flat plate...

I haven't really found anything on this very specific, but very obvious, issue I've noticed in my 2011 Mazda2 Touring MT (~56K). I first noticed it a while ago, predominantly when coasting downhill, foot on the brake and clutch and I hit a bump. At that exact moment, it almost feels like the...

Hi, guys, I am a newbie here and I am looking for some help on my 2003 P5. I appreciate your attention and help in advance. I was replacing the brake pad on the right rear wheel and found out some problem: 1. the inner side pad was totally gone but the outer side is almost untouched; 2. rotor...

Since winter, when I drive for a couple of miles, the car starts to feel like my e-brake is on, during winter I was okay with it because I thought it was just built up salt, but now it still does the same and it feels weird and it sucks on the gas mileage too, anybody who had the same problem...

As the title states. Let me know if you've got some MZ6 brake parts laying around. Looking for front & rear rotors, calipers, pads. Interested in MS6 brakes, also. Will the MS6 rotor/caliper clear a 16" wheel?