boost

First thread here on the forum. Just completed what I would consider a mild build to my block. k1 rods, wiseco pistons, balanced crank, all that good stuff. Debating what I am gonna do with the head. But anyway, the car has a front mount, wideband, and I'm assuming stock turbo. Was originally...

Hey Guys, I'm just wondering what all you guys have done to get some more speed out of your MS6! I just bought mine about a week ago, and I'm just curious what upgrades you all started with just to give her that little bit of extra oomph. Mine is a 06 Mazdaspeed 6 GT Obviously theres the cold...

Ok so I just got my map 2 weeks ago. Haven't driven it much due to bad motor mounts. Replaced top passenger and rear mount. Also replaced plugs and MAF My problem is when the car is under boost, when it winds up good, the motor jumps like it's gonna fly out of the hood. What could it be. Only...

Congratulations to Jperera! Vote Now for April Joseph Perera 2002 Mazda Protege LX Engine ATX-MTX conversion w/ MSP LSD HiBoost Turbo Kit IHI WRX VF23 Ball bearing turbo WRX 440cc Blue Injectors Mishimoto Slim Fans FMIC HKS BOV 3" Turbo-back Exhaust HiFlow Cat 3" Vibrant...

Im posting a new thread because after watching a few youtube vidos i found one and it is exactly like my problem under boost the car starts to studder and lose power. if im at idle and i turn the air on no ac just the fans my vacumn jumps from -22 to betweeen 13-10 with the car acting like its...

alright heres the question- Why does my turbo only push boost after 4000 rpms? and when it does, it only get MAX of 5psi. any ideas? is it tuned weird? is my turbo not working correctly? i know these cars stock came with only like 6-7psi but i dont feel like i should have to push my car to...

Im stuck on something i cant seem to figure out. maybe some of you turbo people can help me out, toss me a bone you know. ok so anyways here is what is happening. My WG and PR valve are both t'd into the same port. But the port on the tee that sources the WG was blocked off with a screw. now...

I'm wondering how much boost my msp can handle. I have a home made waste gate regulator and im running it around 15 pounds of boost with a stock turbo. It has a front mount intercooler, cold air intake, exhaust, and other little things. It's so much better than driving with 5-7 pounds. is it ok...

Ok. I like the thought of sending a turbo off to BNR for a build, but they say I can't send a K0422-582 off for an application for my Speed3. Side by side, the 582 seems to be the same turbo, especially if they're replacing th CHRA. I'd just like to know if anybody can clarify the difference...

I currently have a msp with 102,xxx its my daily driver, just put in a new welded lsd, clutch some axles, all the motor mounts and tranny mount. its ready to go again, since I snapped my previous lsd. I have a cai (rigged) still has plastic piping just the kid before me slapped a filter on and...

Hey what's up. Just need some information about turboing my 99 protege ES 1.8 manual tranny. What's all the parts I need? So far I got the turbo with mani and intercooler. I wanna piece it togather instead of buying a kit. What else do I need? And where can I buy the parts? Thanks guys.

I have a 03 MSP right now I have a boost gauge, cat-back exhaust (has what looks to be a glasspack after the cat) idk.., CAI, eibach lowering springs, blitz 2 turbo timer. I want to put an ebay fmic that comes with aluminum hardpipes and a bov, also want to put a wastegate rated around 9 psi, I...

Garrett GT25 Turbo. No shaft play at all, spins freely. No leaks, no smoke. $250+shipping Blitz BOV. Not much to say about it as i havent ran it, however it does work, vaccumed to test.$75+shipping 2.5 inch CXRacing FMIC Piping. Unused $40+shipping Also have a set of 440cc injectors i'll be...

Well, it has been good while it lasted. I am finally selling my car after 9 years. I have 2 small boys and no time or money to continue upgrading this car so I am selling it and the parts I have collected that I never got the chance to install. Over the next week, I will be adding other parts...

I know there have been several posts about this topic, but I need help quick. Recently my bottom end went out, so I had someone redo the bottom end. They removed, fixed, and then put the engine back in (took 2 months... but that's besides the point). Anyways before them doing this work the...

So, just sold my Ls1 FD for something with a little more.., I mean a lot more... room. Got rid of the speed bug, mostly but still enjoy a little boost. Just don't get the same feeling from an NA v8, honestly. Anyway, I just picked up an MP5, real cheap. It's white with sunroof and manual trans...

I need the unit, wires, and software(everything!). I plan on running a MSP kit on my P5 and read this was the best engine management solution. I don't care if it has any maps on it, I'm going to run my own anyways.

Does anyone have a pic of how they hooked up there electronic boost controller to there vac and boost line i cant figure it out... Thank you. 03 mazda protege mazda speed stock turbo.

I would like to buy a stock msp turbo that is well maintained and in working condition. Also if someone has an exhaust system for a msp that is turbo back and has little to no rust, I would also like to buy that Thanks

ok so im gonna sound like a noob but f*ck it, so i got a MSP and while i was deployed, my dad had forged internals put into it, (funding by me of course, im not that lucky) so now that i fixed the "weak internals" problem, how do i crank up the boost??