bolt

Hello, Im having a clunking sound coming from my right rear suspension and Im almost 99.9% sure that it is the strut mount that is to blame. I have a few questions because the car is so rusted. 1. How exactly can I check to see if it is strut mount that is at fault. 2. If I remove the strut...

Hi guys, Been a lurker here for about a month before finally buying my 2014.5 CX-5 GS. Glad to be aboard in good company. Last week I found in my garage a new looking, black automotive type bolt under the front left side of my CX-5. I've attached pics to this post. It's about 1" long and has...

Hi all, I am the happy owner of a 1996 Mazda Protege LX (1.5l). Today my mechanic broke the bolt which provides tension for the drive belt. This is an odd looking bolt as it has a hole threaded through the head to accept a longer bolt that applies tension to the belt. None of the parts...

Hi, I have a Mazda 5 2008 that has the airbag error code 42 so have a look at the sensor and have found one of the pins has disintegrated. However, I managed to break the head of the second bolt when I was taking the shield off to get to the sensor. Here is a photo: Any ideas how I can...

Hi all, Just like to say thanks for all the help i've gotten from you guys with this car. I bought a used turbo off ebay and am in the process of taking the old one off and ran into a small snag. If you look at the pictures I attached how do you guys get this bolt off? There is a steel braided...

Hello, So I was doing my timing belt and borrowed a friends torque wrench which apparently didn't work since I heard no Clicks and the end result is I tore a bolt off in the waterpump when I was tightening it :( Any recommendations? I am ready to scrap this car I'm so pissed. Will I have to...

I went to go replace my front motor mount today and discovered that the nut threaded on the through bolt was stuck. I don't know if anyone else had this same issue. I had to use force and leverage with a breaker bar(which my other mounts weren't like this), and it still didn't break loose...

I have a set of 17 inch American Racing Rims that were on another car before I bought my MS3. I was hoping to put those rims on the MS3. As it turns out the bolt diameter of the MS3 was a few MM larger than the rims. I was just wondering if you could buy spacers/adapters for this type of thing...

I had purchsed 2 set's for my mazdaspeed3 and had only intalled one set and decided to go with a more aggresive look than 15mm; one set was just installed not driven with and the other set hasnt been installed. I am selling them for $200 or best offer: shipping is not included. if your in the...