WTB Stock MSP 2.0 exhuast manifold

[JUICEDSE]

I'm looking for the stock turbo exhuast manifold for the FS 2.0 engine. For you guys that have replaced the stock manifold with an aftermarket one, I'd like to take your old stuff away.

 

[Captain KRM P5]

599 plus shipping for a new one if interested

 

[JUICEDSE]

Would like one used. And does the turbo bolt pattern allow for a T3 footprint?

 

[Captain KRM P5]

Would like one used. And does the turbo bolt pattern allow for a T3 footprint?

no, it will not even come close to mating up with a T3. it will only accept T2X series turbos (t25, t28, gt28, etc)

 

[Captain KRM P5]

if you want a T3 compatible manifold i can get you one, new though, not used. you will find it near impossible to fine just a used protege manifold for a t3

 

[nate0123]

here's a custom one... http://www.msprotege.com/forum/showthread.php?t=97318

not cheap though

 

[JUICEDSE]

Do you guys think that by using an adapter plate like this http://img217.exs.cx/img217/1318/hft32xd.jpg it would work. I'm building my own downpipe

 

[Captain KRM P5]

i would not trust one of those under heavy load to hold up. the more you complicate the connections on something like this, the more you run the risk of something breaking. and when something breaks on a turbo setup, it usually breaks something very costly. i understand you want to do this on the cheap, but really thats not the best idea if you are serious about going turbo. spend the extra coin and buy the right parts.