WTB: MS3 front and rear struts

[f50spyder]

Anyone have their slightly used struts and shocks They want to get rid off? I hate to put the original equipment back on but can't really spend $1000 for coilovers at the moment. Let me know thanks.(jerkit)

 

[GoFast]

what about 600 for some konis?

 

[f50spyder]

Konis

what about 600 for some konis?

I've heard that the Konis even on their softest setting are pretty rough riding. I don't know. Just what I heard. I assume your talking the Koni sports? Bilstiens aren't to be had in the country, and ********** carries some really nice coilovers for $900 but$$$ At $600 for the Konis' I'm not far from that. Thats why I figured just OEM cheap used for now, if thats even possible.

Thanks for your any input.(godown)

 

[GoFast]

I've heard that the Konis even on their softest setting are pretty rough riding. I don't know. Just what I heard. I assume your talking the Koni sports? Bilstiens aren't to be had in the country, and ********** carries some really nice coilovers for $900 but$$$ At $600 for the Konis' I'm not far from that. Thats why I figured just OEM cheap used for now, if thats even possible.

Thanks for your any input.(godown)

The Koni yellows are pretty stiff but the FSDs are quite nice.

 

[AMS38U]

i put some bc coils on my car and i have all the stock suspension just laying around

 

[SwampAss]

I pm'd you. I have a set with mazdaspeed springs I'll let go shipped to you in PA for $250.

These are the factory offered mazdaspeed springs. 30% tighter than stock with a mild drop. No camber plates though. You don't need them IMO for the springs.

The box is 67lbs.

 

[SwampAss]

they are boxed up and RTG. I had another buyer who found a set local to her.