TDC and cam positioning

I have a 2003 Protege5. About 2 years ago I took the engine apart and cleaned the valves, replaced the valve seals, head gasket, along with other gaskets. I'm just now getting back to putting everything together.
My issue is that I don't remember how to position the cams when putting them in. I also need to get it back to TDC. Are there any diagrams or pictures that can help me? Or can anyone help me with this?
Much appreciated!
 

pcb

The Diagram Dude
:
2002 MP5
This should help,..
Screenshot_20230125-161437_Acrobat for Samsung.jpg


Screenshot_20230125-161632_Acrobat for Samsung.jpg



Here's a link to the factory service manual,..

 

pcb

The Diagram Dude
:
2002 MP5
Here's a link to changing the timing belt. It should help a bit.
There's a link to a YouTube video in it that may have some pictures?


A lot of pictures have been lost over the years. You could try searching "cams" in this forum.
 
Here's a link to changing the timing belt. It should help a bit.
There's a link to a YouTube video in it that may have some pictures?


A lot of pictures have been lost over the years. You could try searching "cams" in this forum.
Thank you. I will read over this and do the search. I'm new to this site so I'm still trying to figure out how to navigate.
 
  • Like
Reactions: pcb