Protege5 Tein S Techs on MSP?

[slo03.5msp]

Has anyone tried doing this to counter act the rear spring perch being so high? I figured since they lower farther in the rear then the front you may get an even stance as opposed to the "rake". Any response would be much appreciated. If anyone has done this any pictures would also be very welcome.

 

[mr2 II]

subbin

 

[Sveivo]

Well, there is not such thing as Protege5 S-Techs. It's still the sedan springs.

The only reason that it looks lower in the rear is that the Wagon has a lower rear fender line and/or is heavier in the rear.

/thread

 

[Sveivo]

Try Goldline springs to counter the higher spring seats, or just get regular Tokico for the rear.

 

[Tom03es]

Well, there is not such thing as Protege5 S-Techs. It's still the sedan springs.

I'll have to double check, but I believe my S-Techs say Protege 5 on the box.

 

[Sveivo]

I'll have to double check, but I believe my S-Techs say Protege 5 on the box.

But is it a different part number than the sedan?

 

[Tom03es]

But is it a different part number than the sedan?

From Tein or from Mazda? The Mazda part numbers are for sure different.

 

[Sveivo]

From Tein or from Mazda? The Mazda part numbers are for sure different.

The OP asked about Tein, so I am referring to Tein.

What I meant in my post is that there isn't a separate part number for the Wagon, which makes it the case that people buy sedan springs for the wagon.

 

[ZZZOOM!]

True the tein P5 and P Sedan springs are the same Part# etc.