Protege MP3 all motor mods

just looked them up, not a bad deal at all. What specs did you go with? Stage 1,2, or 3 specs? Are they installed?
 
I sent my stock cams with the Intergral specs to Schneider Racing Cams to regrind. Got them back in about a month and they were under $500.

That is a good deal. But I'm confused about this. How do you regrind already smaller lobes to make them larger.
 
Lift and duration are increased by grinding away the "base circle" of the cam. The lobe doesn't have material added to it, but the non-lobe part is ground away making the difference between highest part of the lobe and the lowest part of the base circle a greater distance. If you grind away enough of the base circle, you can flatten the top of the lobe and still increase the lift while changing the duration profile substantially. That is the quick explanation :)
 
what would you recommend for a DD? Is stage 3 cams that bad? They seem ok to me:

 
Last edited:
I can picture that. But how do the caps fit afterwards.

Lift and duration are increased by grinding away the "base circle" of the cam. The lobe doesn't have material added to it, but the non-lobe part is ground away making the difference between highest part of the lobe and the lowest part of the base circle a greater distance. If you grind away enough of the base circle, you can flatten the top of the lobe and still increase the lift while changing the duration profile substantially. That is the quick explanation :)
 
Spiced they'd be fine really jut that you'd have a really narrow power band. Do you have an aftermarket ecu?

Stage 2s would be better for a car that's a dd IMO.
 
yeah, Haltech Sprint 500. Had it installed not too long ago working on the idle and pretty much have it dialed in. But I took it back out until I get a few more things.
 

New Threads and Articles

Back