Lowered 14 6, need rear camber help.

[wicked5ltr]

Anyone else who's lowered their new 6, what have you or your alignment shop done to correct rear camber? Mine is lowered on H&R springs, with 20x8.5 and 255/35/20, no rubbing, but the rear camber is still off a little after alignment. Thanks, Tim

 

[agproject]

http://am.mazdaserviceinfo.com/emaz...azda6/n6/books/n6w02/html/id021100800300.html

You are limited to adjusting the rear adjustment bolts. Outside of that you will need an aftermarket camber kit. I've found in the past loosening/adjusting other bolts and hardware will help slightly if your off by just a little. This was on an older Miata tho.

 

[tvanryn]

AutoEXE is selling camber adjustment equipment, but I'm not sure how to get it over here to the US.

 

[wicked5ltr]

I took it back to them today and they got it right. Turns out they had the wrong specs. I took them the correct specs and everything is good now! FYI, the rear adjusting bolts are for rear toe adjustment, there's no adjustment for the camber.

 

[tvanryn]

So is the wandering gone?

 

[wicked5ltr]

yeah, it feels good now!

 

[tvanryn]

Sweet! That makes me happy and hopeful.

 

[agproject]

The link I sent you had the specs. It also shows you where to make the adjustment. I reviewed further in to the manual and it appears that its a single adjustment meaning only toe according to the manual. Do you know if the rear and front has 2 physical adjustment bolts or just 1 per side?

This is what I was referring to: http://forum.miata.net/vb/showthread.php?t=142284

I haven't bothered to look underneath my car yet.

 

[agproject]

AutoEXE is selling camber adjustment equipment, but I'm not sure how to get it over here to the US.

Where did you see this? They do not sell that for our vehicle. If you are interested in purchasing AutoEXE parts just PM me and I can shoot you info on how to order parts.

 

[tvanryn]

You're right agproject. I saw the adjustable stabilizer link on this page: http://www.autoexe.co.jp/english/car/gj.html and confused it with a camber kit. I was not seeing straight for sure, dumb mistake on my part!