Help!Forged rods

[JuanHu]

Where can I find the H-beam forged rods for my Wiseco forged pistons?My car is MAZDA 6i 2.3 MZR

I wanna keep my car N/A,so I got bore 88MM,comp.ratio 11.0 wiseco pistons,but I can't find any 4340 steel forged rods to fit the pistons

thanks for your help very much!!!!!!!(smoke)

 

[JuanHu]

ok,today I found EAGLE rods for the Wiesco pistons,the part# is CRS6094F3D

 

[4DRHTRD]

ok,today I found EAGLE rods for the Wiesco pistons,the part# is CRS6094F3D

Won't work, the crank is 2mm larger on the MS6 vs the NA cranks.

EDIT - why are you posting this in the Speed 6 forum...?

 

[evilmonkeyMSP]

its the 6/MS6 forum... its for both

 

[4DRHTRD]

Here's all the hard parts I could find for the NA car, I hoped that they would work for ours but I'm still doing research:
Enjoy - BTW, any Duratec parts for the 2.3L work for the MZR 2.3L NA cars as they are the same motor internally. The stock crank breaks at 400 crank horsepower so you'll need a forged one. The popular upgrade might be fitting the MS6 crank 51mm vs 49mm into an NA block (I have no idea if this will work).
http://www.marcymotorsport.com/MM-html/FORD/focus/focus_engines.htm
http://focus-power.com/view.php?showme=Stroker_Short_Block_Duratec#

 

[JuanHu]

Here's all the hard parts I could find for the NA car, I hoped that they would work for ours but I'm still doing research:
Enjoy - BTW, any Duratec parts for the 2.3L work for the MZR 2.3L NA cars as they are the same motor internally. The stock crank breaks at 400 crank horsepower so you'll need a forged one. The popular upgrade might be fitting the MS6 crank 51mm vs 49mm into an NA block (I have no idea if this will work).
http://www.marcymotorsport.com/MM-html/FORD/focus/focus_engines.htm
http://focus-power.com/view.php?showme=Stroker_Short_Block_Duratec#

u r a real nice man!mu..haha

Thank you first!!

Can you tell me the Ford Ranger crank's part#??Because in my country,Ford does not sell this car

So I need the part# to order this part

Thanks again!!

 

[wannabe]

its the 6/MS6 forum... its for both

seems to be a common issue...a lot of arrogant speed 6 owners around here.

(not me....)

 

[JuanHu]

seems to be a common issue...a lot of arrogant speed 6 owners around here.

(not me....)

 

[RevLimitLaunch]

how much power are you lookin for doing this n/a? 11.0:1 cr, badass lol.

--what other mods are you doing to this car, sorry to get off topic, you can pm if you feel it necessary, just have a preference to kno.