Dimensions of MS6 trunk?

[BADFISH6]

Are the dimensions of the MS6 trunk the same as all Mazda 6 trunks? Wondering if this will fit my MS6....
http://mzparts.dealerfit.com/store/mazda-mazda6-cargo-tray-sedan-prod295_2410.php

 

[BIGJOHNB20]

Pretty sure that due to the awd system and additional bracing, the MS6 trunk is smaller than a regular 6 trunk. By how much I don't know.

 

[BADFISH6]

well then does anyone know where to buy a trunk liner for the MS6? ive been looking an can only manage to find them for the Mazda6

 

[keymaster]

The standard trunk is about 16 cubic feet, the MS6 trunk is 12.9. The 3 lost cubic feet are due to the bracing between the wheels...this takes up just a bit of space at the back of the trunk. I haven't looked into too many standard 6 trunks, but the general spacing (i.e the framework, layout, etc) should be the same in both aside from the extra bracing.

I would bet that will fit, or will be so close that you can make it fit either by trimming or with a bit of pressure. You're not likely to find one dedicated to the MS6, so if you really want one this is probably your best bet. Good luck.

 

[jaymangrum]

i bought the factory 6 truck liner for my ms6, had to trim it, but it works just fine. im talented with a razorblade, so when i was finished, it looked as if it were made that way.
Purchased it from finish line perf. 59.00usd and matches the front all weather mats.

http://www.finishlineperformance.com/store/product.php?productid=16689&cat=276&page=1