silverspeed03
Boost Junky
- :
- 2008 MS3
pics would be tight!!
Any interest in a Front Mount Intercooler?
- Thread starter ZenProtege
- Start date
- :
- Mazda Protege Titanium 03.5
Good to see there's some interest. I'm suppose to be getting my bumper repainted soon and I've been waiting to remove it and finalyze things.
I really didn't want to post any pictures until everthing was finished. These pics will hopefully give you a little insight about what to expect when I'm done. The piping is pretty rough right now.......The pipes aren't whats important, its the routing of them. It's all very straight and direct. If you can see it through the pictures, the bend on the lower hot side pipe needs a 1/4 turn towards the front of the car to line up right above the PS lines and mate with a 90 degree coupler off the IC. On the cold side, the biggest change will be the piping off the TB and there will only be 2 pieces of piping with 2 bends instead of those 3. I'm taking my time with this and will post new pictures once I get the setup on the old piping finished, and when I remake it all with new piping.
It gets close betwen the AC lines and Lower radiator hose. It will be alright once the pipes are welded
Right under that hole is where the piping will go through the firewall
I really didn't want to post any pictures until everthing was finished. These pics will hopefully give you a little insight about what to expect when I'm done. The piping is pretty rough right now.......The pipes aren't whats important, its the routing of them. It's all very straight and direct. If you can see it through the pictures, the bend on the lower hot side pipe needs a 1/4 turn towards the front of the car to line up right above the PS lines and mate with a 90 degree coupler off the IC. On the cold side, the biggest change will be the piping off the TB and there will only be 2 pieces of piping with 2 bends instead of those 3. I'm taking my time with this and will post new pictures once I get the setup on the old piping finished, and when I remake it all with new piping.
It gets close betwen the AC lines and Lower radiator hose. It will be alright once the pipes are welded
Right under that hole is where the piping will go through the firewall
- :
- Mazda Protege Titanium 03.5
- :
- Mazda Protege Titanium 03.5
I want to use a 22X6" core made by treadstone intercoolers. It's an exact replica of a bar and plate spearco intercooler.
- :
- 2000 Protege DX
holy crap!...please resize those pics....21" monitor and I still have trouble seeing them
