angles for DIY cold air

[benzero]

Before you bastards flame me to death(burnout), I have been searching for like half an hour now for this answer and I can't find it.

Does anyone have a breakdown of the angles to create a DIY cold air intake for the p5? I don't want the short ram, I know that would only be a 45. I want something like the injen intake down into the driver fender well. If you know of a thread where this has been addressed, please post the link.

I want to use the least amount of angles possible obviously. Did this on my previous protege, but I know it's not the same as the p5.

 

[sprinter119]

did you check the how to i thought was one there but i am interested well seeing as how i already have the sri piping

 

[lil_red_wagon]

mine is an aem and it just angles down from the intake manifold to the back of the radiator. this is the best one that i have had so far.

 

[MonkeyBone]

Take a look at my post on this thread and tell me if this is what you're talking about

 

[autoxes]

Why don't you just get one for thirty bucks on ebay? it's the same thing...It's just freakin' tubes.

 

[benzero]

Why don't you just get one for thirty bucks on ebay? it's the same thing...It's just freakin' tubes.

that's a short ram though. I want the full cold air, down into the fender well.

mine is an aem and it just angles down from the intake manifold to the back of the radiator. this is the best one that i have had so far.

yeah, that's the one I had on my old car, but I want a true cold air.

Take a look at my post on this thread and tell me if this is what you're talking about

Yes, thats what I'm talking about, but you still routed to the stock airbox, I want to go from the manifold to the fender well. I might be doing a DIY and a how to soon on this. Seems that the info isn't out there.