?

[MSP FOR LIFE]

anybody know what a breaker bar is and what it does and where i can get one.

 

[Gbourdon]

its like a ratchet without the ratcheting part. but longer.

 

[Gbourdon]

more leverage and no busted ratchet.

 

[TX Speed Demon]

http://www.hand-tools-power-tools.com/socket_sets/breaker_bar.htm

 

[WillisW555]

you can go ghettofied like my pops and just get a big pipe and put it on the end of your ratchet.

Snap-op and craftsman both have lifetime warranties.

 

[Captain KRM P5]

big frikkin pipe does the trick

 

[BlueMP5Dave]

Sears or any place that sells tools, It is used to break torque on really tight bolts. I found a link on the Sears sight here's a example. Happy hunting, auto parts stores will have them also.

http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00944201000

 

[Notorious_V.I.C]

Sorry to thread jack......but wow i'm surprised no one made rude commemnts about this question or bombed on him for not knowing what a breaker bar is....

I congratulate u all..

and once again i appologise for thread jackin

 

[BlueMP5Dave]

Not everyone is a Mechanic

 

[BOOSTR]

Yeah, a PVC pipe cut to size or an aluminum fence pole will get the job done. I carry a piece of PVC in the trunk to break the wheel lugs if needed. Its all about leverage and WD40!

 

[MSP FOR LIFE]

yeah thanks guys. got one at the local autozone.

 

[Notorious]

YOU DONT KNOW WHAT A BREAKER BAR IS?!?!?!?




hahah im just playing, i saw your post about the front mount, the funny thing was I did mine yesterday. Almost literally busted my balls. I put the socket and ratchet on the bolt and couldn't get enough leverage so I used my foot from under the car. Well my foot slipped and with the forward moment... well i things could have gotten bad then. The bolt eventually came off but i had to run to autozone to get some bolts because awr didn't send me any and the stockers don't thread up.

 

[FC3s Boy]

^^^ ha ha ha just use a big pipe