4 gauge ring terminal help

[MSP FOR LIFE]

Was wondering if anybody knows what type of tool i need to crimp 4 gauge ring terminals. thanks

 

[JFW]

Take the assembly to a car stereo installer, they should have the tool to crimp it correctly. The crimping tools and dies start at about 200$ for 04 Ga.

 

[www.03msp.com]

If you have a Menards by you, go to the rope section, pick up a Tool Shop Yellow crimp tool (very large like $200 one) for $24.82 w/tax - does the job just fine. It took me forever to find this.

- Brian

 

[JFW]

Going to Indy Saturday, Menards will be my first stop.

 

[Bijou-MP5]

If you have a Menards by you, go to the rope section, pick up a Tool Shop Yellow crimp tool (very large like $200 one) for $24.82 w/tax - does the job just fine. It took me forever to find this.

- Brian

you found it!!! cool(mj)

 

[servoeyes]

or just use vise grips, a hammer and screwdriver, or a vise.

 

[AFaceInTheCrowd]

Bfh.