2016 US CX-5 Audio System with bluetooth but without Center Display Upgrade

Sharing my information:

Factory unit was Type A 2015 Panasonic CQ-JM74E0JM not compatible with Harmony Audio Compatible with 2013-16 Mazda CX-5 HA-707903 Factory Stereo to Aftermarket Radio Harness Adapter Plug/Scosche MA03B Compatible with Select 1998-15 Mazda Power/Speaker Connector / Wire Harness for Aftermarket Stereo Installation with Color Coded Wires
Installed backup camera NATIKA Backup/Front View Camera White
Replaced with Double DIN Boss System.

Connections:
USB: B09BCH4SRD RED WOLF Car Radio Stereo Retain OE Factory USB Port Retention Harness Wiring Cable Adapter for Toyota 2012-2018, Lexus 2013-2015, Subaru 2013-2016, Honda 2015-2019
Antenna: 40-HD10 Metra Electronics 40-HD10 Factory Antenna Cable to Aftermarket Radio Receivers for Select Honda/Acura Vehicles
Main Connector: B07S9J952H RDBS 20-pin Headunit/Radio Wiring Harness with Steering Wheel Switch Wires Compatible with 2007-2019 Nissan | Upgraded Version of The Metra 70-7552 | Harness Includes VSS and SWC pins
Bluetooth/Aux Connector: Not connected. So losing SWC Speak/call/end call and Aux Audio Port currently. Installed new microphone.
SWC: PAC C4RAD Car Radio Steering Wheel Control Module SWC Retention (only Analog1 connected)
New Audio System Housing: Metra 95-7522B Double DIN Dash Installation Kit for Select Mazda CX-5 2012-UP Vehicles
 

Attachments

  • 2016 Mazda CX-5 - Factory Radio + Bluetooth - connections.pdf
    370.5 KB · Views: 48
:
South Carolina
:
12 MZ5 13 CX-5
I used a Kenwood Excelon DMX8905S with a iDataLink Maestro RR in my install. Amazing pieces of kit. I even get full gauges right on the face of my radio.
 
Sharing my information:

Factory unit was Type A 2015 Panasonic CQ-JM74E0JM not compatible with Harmony Audio Compatible with 2013-16 Mazda CX-5 HA-707903 Factory Stereo to Aftermarket Radio Harness Adapter Plug/Scosche MA03B Compatible with Select 1998-15 Mazda Power/Speaker Connector / Wire Harness for Aftermarket Stereo Installation with Color Coded Wires
Installed backup camera NATIKA Backup/Front View Camera White
Replaced with Double DIN Boss System.

Connections:
USB: B09BCH4SRD RED WOLF Car Radio Stereo Retain OE Factory USB Port Retention Harness Wiring Cable Adapter for Toyota 2012-2018, Lexus 2013-2015, Subaru 2013-2016, Honda 2015-2019
Antenna: 40-HD10 Metra Electronics 40-HD10 Factory Antenna Cable to Aftermarket Radio Receivers for Select Honda/Acura Vehicles
Main Connector: B07S9J952H RDBS 20-pin Headunit/Radio Wiring Harness with Steering Wheel Switch Wires Compatible with 2007-2019 Nissan | Upgraded Version of The Metra 70-7552 | Harness Includes VSS and SWC pins
Bluetooth/Aux Connector: Not connected. So losing SWC Speak/call/end call and Aux Audio Port currently. Installed new microphone.
SWC: PAC C4RAD Car Radio Steering Wheel Control Module SWC Retention (only Analog1 connected)
New Audio System Housing: Metra 95-7522B Double DIN Dash Installation Kit for Select Mazda CX-5 2012-UP Vehicles
Hey, thank you for sharing this information, however does your vehicle have the command center control knob? located right below the shifter, which is responsible for increasing volume, scrolling etc..? Because I would like to know if a harness or some sort of wiring is needed in order to retain those factory settings?
 

Latest posts