2007 rx8 P0300 help, odd reason for problem starting

EcksButton

Member
:
Rx8
Bought a used rx8 from some dumb kid, I say that because when I bought it, it ran for about 3 days then the after market oil cooler he put in had a hose come lose and dumb all the oil...now the P0300 code come up...I just changed the coils and it's still happening...should I continue to go down the normal list or does anyone have better ideas of what might have happened and how I could possibly fix it? Thank you for your time if you do end up reading this...
 

EcksButton

Member
:
Rx8
How does the engine run? did you check the spark plugs?

Didn't check the plugs yet...she starts fine but after idling a for about a minute feels like she wants to die out...I changed the coils because at first the code said second cylinder misfire but now it's random misfire
 

mazdadude

ZOOOOOOOOOM ZOOOOOOOOOM
:
'16.5 Mazda CX-5 Touring
Was it running when it dumped the oil?

Sound like you have a weak compression motor. (sadbanana)
 

EcksButton

Member
:
Rx8
Sorry for the late update, I work the graveyard shift and long hours...

I was driving on the freeway when it dumped the oil...hose came lose cause guy I bought it from didn't tighten it down enough...walked about 2 miles to a gas station and back...I actually put 10w-40 in when I got back to the car (4 in the morning so no one wanted to stop and help) started the car and the oil dumped again, found out after getting home I put the wrong oil, though it was only in there for a second. After the oil dumped again is when I found the lose hose...towed it back to my house and started cleaning the intake...car starts and then after about a minute starts sputtering then revs itself back up just to die down and sputter again...

If it is a compression problem would you be able to tell me what I can do to fix it?
 

mazdadude

ZOOOOOOOOOM ZOOOOOOOOOM
:
'16.5 Mazda CX-5 Touring
Sometimes the rotor Apex seals can be decarbonized with a special cleaning treatment. However most of the time the only thing that can be done is to disassemble the engine and rebuild the motor.