Search results

  1. Z

    cant trace a squeal/squeak

    So Ive had this annoying squeak coming from the front. The slower I go, the less often it sounds. Its intermittent like a card in a bike spoke. Problem is I cant reproduce sound with the car up on a lift so I cant find it. It also doesn't sound like its making the sound when Im going fast, just...
  2. Z

    Car can't pass smog check, any ideas?

    So I smogged my car a couple weeks ago. Here we're the results with a single high flow cat(sls midpipe) Co2% @ 15mph 13.93/25mph 14.0. O2% 388/364. CO .61/.63 and NO(ppm) 2253/1802. Now I tested again this time bolting a stock midpipe directly to my aftermarket so I now have 3 cats. I failed...
  3. Z

    replacing LSD, what else should I do while the tranny is out and open?!

    So I believe Ive fallen victim to a blown LSD. While its open, what should I take care of as preventive care. Is there like a tranny rebuilt kit that has all that is needed for a rebuild?Car has 116k miles on it. I'd like to get it all ordered in here by next weekend when my buddy plans to...
  4. Z

    last bolt ons-whats the estimated power gains

    so Ive realized Im an intake mani, exhaust mani and s-pipe short of having all bolt ons done. with my mods at 9psi, is the HP to $$ ratio there to get those?
  5. Z

    WTB: driver side fender-blue

    lemme know if you got one on a part out you want to get rid of. I got a few dents in mine from an incident at work last week and pending the cost of paintless dent removal, I might be better off just buying a whole fender (from what Ive gathered, it averages around 60$ a dent for my sized one. 5...
  6. Z

    door handle not working

    ok, you pull the door handle, it pulls a metal rod up that operates the latch for the door. Well, my metal rod keeps popping off the door handle. anyone know of a way to cure this? what needs to be replaced if so?
  7. Z

    Dyno results from 3/28/10

    So I finally got a chance to dyno my car yesterday. I just reinstalled a JDM Sam tuned unichip(mail order tuned) last week so wanted to see how it did mods are injen cai converted to sri, ms3 forge bpv, turbolife fmic, sls catted 2.5 inch midpipe, thermal catback and as mentioned the unichip...
  8. Z

    I need both rear door lock acuators and driver side a pillar!

    if you have these let me know! thanks
  9. Z

    I need a drivers side A-pillar

    new gauge mounting, no longer need holes in my current one. if you have an unmolested one PM me thanks
  10. Z

    want to buy--msp front bumper and lip

    seeing if anyone has a front bumper and lip for sale with no snapped support tabs. blue and minimal road damage would be great pm me thanks
  11. Z

    prosport wideband just gave out

    so I wired in my wideband for power only(still needed to get the o2 bung welded in) and it operated fine. noticed it cut in and a few times but stayed on. then after being off for a few hours it did not go back on when I started the car up. tapping on it as I did before did nothing. I soldered...
  12. Z

    does the msp forge bpv whoosh ping like the ms3

    so im having issues with the ms3 forge bpv I have on my car and was thinking cutting off the flange and just using the nipples on the cold pipe and intake pipe to connect to the forge bpv made for the car but I like the whoosh ping i get. does the msp forge do the same? also, what size are...
  13. Z

    wtb-dual a pillar pod

    not looking for the whole piece, just the pod that mounts onto the current pillar pm me if you have one. thanks!
  14. Z

    WTB-fog light delete

    I need the driver side fog light delete. If you have one, PM me please since I get the notification in my email thanks!
  15. Z

    stalling idle on decleration and vacuum affected

    heres a vid of the issue http://www.youtube.com/watch?v=6jI3sLRz8Ec it happens in neutral and coming to a stop while under load. all when warmed up what could be causing the leak at this time. Notice the vacuum levels off to 20+ so its not like its a consistent leak. Also my fuel economy has...
  16. Z

    turbolife fmic ftw!(pics and sound clip of forge bpv)

    so finally got it all hooked up last week and I am loving it. even in 100+ degree temps car still pulled strong in 4th gear(where the heat soaked smic would fail) just a couple pics I thought Id share upon delivery of the turbo life ooh that forge looks nice a quick test fit of the forge...
  17. Z

    cooling fans not coming on?

    ok so the drive to vegas was torture on the msp. The couple stops we took(barstow baker and primm) I checked the coolant and it was literally boiling over in the overflow tank. the needle never past the halfway point. I started to wonder if my fans were even kicking on. heres the test I did...
  18. Z

    looking for some soundclips

    ok guy, the exhaust clip thead is outdate and Im looking for specific. I wanna hear high flow cat with no muffler and no resonator(exiting out the rear). Ive detatched the axle back before and it resonates too much under the car to get a good idea on sound quality. Also, no cat with thermal...
  19. Z

    3 wheelin FTW

    <object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/zjnJm8DNglM&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/zjnJm8DNglM&hl=en&fs=1&"...
  20. Z

    stealthbox/sub and amp mounting boxes?

    I want to get the GTSpec trunk cage and get rid of the factory deck box, but I dont want a box sitting in the middle of my trunk with an amp mounted to the back seat. anyone know of boxes I can put to the side against the fender, but still leave room for the link bars on the trunk cage? Im...
Back