Search results

  1. C

    paddle shift on CX-5

    Yes, check post #109 again.
  2. C

    paddle shift on CX-5

    Sorry to hear Srad600. Did Your steering Wheel have all 4 mounting holes complete with threads? My Guess is you need the lower wiring set: K015-V7-481 this is Mazda's genuine harness. This item was not possible to order here in Norway( number not known in system). I ordered the lower wiring...
  3. C

    paddle shift on CX-5

    That is correct Mazdadude. It depends how long time it will hold the gear before going back to "full auto" again. If i am just crusing along with very little load on the engine and flip the down paddle, it shifts down instantly but reverts back to "full auto" in just 2-3 seconds. If i flip the...
  4. C

    paddle shift on CX-5

    I like them very much . I use them both in manual and auto. When driving in auto mode i often flip the down paddle to momentarely force the tranny down one gear. This might not be neccesary on 2016 models with a sport mode. The operation is exactly the same as Mazda 3, 6 and CX-3,s with...
  5. C

    paddle shift on CX-5

    Originally Posted by SVShootingStar View Post This took me less than 2 hours and it was all plug-n-play. No adding pins to connectors or even a lug to ground... Yes but Your car is as 2014 Mazda 6. My 2012 CX-5(i live in Norway) needed wiring between lower clock spring and start/stop module...
  6. C

    paddle shift on CX-5

    Fahrenheit, since your car is a 2016 it might be more prepared for paddle shift, so here are a couple of questions: did your steering wheel have all 4 holes(to attach paddle shifters) drilled and threaded allready from factory? What about wiring between lower clockspring and start/stop unit...
  7. C

    How to - PADDLE SHIFT Retrofit (Mazda CX-5 2.0)

    I finally did this mod today to my Norwegian year 2012 2.0L awd petrol. It works Perfect! Ref to my post # 47 for part numbers. Used an allen key 5mm to release the airbag, Had to drill and tap one hole 5mm on each side of the steering Wheel for attachment of paddles, (one each side where...
  8. C

    How to - PADDLE SHIFT Retrofit (Mazda CX-5 2.0)

    Here in Norway i just bought from my local Mazda dealer: GJY1-76-3P0 Paddles(including its own harness) BHN9-32-049C02 Cover BHN9-32-750 Screws for paddles GJS2-66-4M2 Harness (this is Mazda's genuine harness instead of the UPPER one shown in Ride92's post above). 9YA011003A...
Back