Search results

The middle bracket bolts, that goes through the bushing, are missing. I ordered it from the dealership, waited two weeks, and got the wrong bolts. As it as, 3/4 bolts are in both control arms. Recommend a site or hardware store? NAPA didnt have anything.

Test it. Rent a kit from auto zone. Refund upon rental return. Its easy. I suck and I did it.

Noob here- unlikely wheel bearings and/or hub?

Got my other side (amazon and autopartswarehouse) and they feel the same. Hammer tapping does move them Both are Moog

AutoMANtic.

Well, it moves a little. Tried a small 2lb hammer and tapped it harder.... Does not move freely, but maybe an inch with 2-3 taps

Moog RK620073 control arm w/bushings and ball joint. Out of the box, the ball joint does not move. Tapped it a few times with a hammer, and it did not budge. Is this normal for our car?

like i said, ignore the display pics. http://www.autopartswarehouse.com/sku/Moog/Control_Arm/MORK620073.html

@hornsfan, thanks

just wanted to say, i just had a very minor shipping issue with autopartswarehouse.com (really not entirely their fault, but the carrier) and they went above and beyond with their service...and they have free shipping for orders over $50. not trying to shill. like i said, i used rock auto...

Mine just went bad around 150,000m Originally ordered beck arnley through rock auto, but they sent out the completely wrong parts, and won't refund my expedited shipping until they receive the parts back. I haven't had a problem with them before, but their customer service was bad. Not...

What are good brands? curious about mevotech, the JC Whitney replacement brand, etc. I want good quality.

Yes. Have both checked.

Pics. Congrats.

I had an awesome head gasket experience. I'm using this site again to replace my hubs (pressed by shop), and apparently my control arm since the ball joint cover is torn. This reminds me to donate.

****, guess I might as well do it ...after I replace my front wheel bearings and find the vacuum leak.

I suck with mechanics. I assume I should be fine since the noise is fairly recent. Thanks!

Pretty sure my front wheel bearings are bad (droning/humming changes with speed), and if not, they have 153k on them, so I might as well. Should I replace the front wheel hub at this time? If not, when and why? Its under $100 for both front wheel hubs. Im getting the SKF wheel bearings, SKF...

I was under the impression that JDM motors had slight differences and needed some different stuff.

Solved my p0300 and p072, was chasing a vacuum leak and worried by white odorless exhaust smoke. Dipstick looked fine but the oil cap actually had some milk shake. Had the head gasket fixed 20,000 miles ago. I like the car. I think it would be better to replace the engine vs another hopeful...