Search results

Recently bought a header with a T3 flange. Looking to bolt it up to our T25. There is an adapter for the conversion, however, it's 1.5" tall. My concern is, that it's going to push the turbo further down and have fitment issues. I thought about having a T25 plate welded on the header, but later...

Hey guys I'm looking to get back into using PS. It's been a little while, but if anyone wants to send some photos over, I'll be more than happy to try and dress them up. monobolt@hotmail.com RE: MSP-PS It's probably going to go over to my "junk" box. Make sure to use the RE: MSP-PS. DOn't...

Looking to rebuild the front end. It's been handling rough. Thanks New England!! Wondering if any one has changed out the upper and lower control arms and what route you took. Napa, Mazda, or ..... looking to find the best replacement. Looks like I'll be replacing the outer tie rods and...

Hey all, I'm looking to install this.... http://www.speedcircuit.net/product_info.php/cPath/21_39/products_id/119?osCsid=acd612f2606712ce6c45a55bd2a35397 I don't want to tap into the main harness at pin 88. I'm hopeful that someone knows which one "sensor pin b" is..... None of the pfd's will...

Morning all! I'm wondering if anyone has any AEM FIC maps. Currently I'm running with a stock turbo and psi, Injen cia, hard pipes, stock inter-cooler, stock injectors, turbosmart dual bov, and Perrin 3" turbo back (cat-less). Looking to see what you guys have, if any. Thanks!

Any MSP owners on facebook? I'm on the "MazdaSpeed Protege" page, just wondering if anyone is on there or FB.

Recently, I was driving home and clipped a damn possum. I like to say I was helping him with his acting career. Needless to say, he cracked my front spoiler. So after talking to my friends over at the body shop, I work for a dealership, they searched for one for me. Well looks like there is only...

I've been looking at racks online for kayaks and snowboards. Wondering if any of you have one and what brand and model. Can't decide on which route to take.

I'm thinking about adding an AFR gauge, however, I've read people using the front O2 or the rear O2. How about using the third hole and anther O2 sensor? Currently, I'm using a custom turbo (S/J/down, whatever you want to use to reference) pipe and the Perrin 3"(turbo-back cat-less). On the...

Was wondering if anyone has attempted to remove the outlet off the turbo while still mounted on car. I'm replacing the s-pipe and exhaust (turbo back) and can't remember from the last time I took the pipe off when I sent it (turbo) out to be rebuilt. Yes... No....? Any insight would be awesome...

Recently, I thought the alignment was off causing some wonder/drift in the steering system. Also, whenever turning the wheel hard left or right, there is a loud grinding. So, before having the technician at work put it on the rack, I checked the front end for any play in the system (loose...

Wondering if you all would know which is the best clutch for money/value and where the best place to purchase. Looking for something good for daily driven and the occasional "red-green-go" down the road.

Hey all, I ordered my hardpipes from SU and it came in 3 sections. I'm wondering about the install. Looking to put in my TS dual port bov. Need a little help with it. I'm not sure if I'm keeping the stock bypass valve in it. From what I understand, when using a dual port, you delete the stock...

Hey all, My name is Kyle. I haven't seen a MSP around my parts and was wondering where everyone is from. I've seen some post from TX, NJ, CA, and everywhere else, but nothing local to me. If I remember correctly, I've seen one in the Worcester, MA area.

Was looking to hardpipe. My hotpipe is damaged and I plan on keeping the SMIC stock as of right now. So I was looking at SU's harpiping kit (SU's Product Code: SUMSPAP). Now, I'm undecided on which BOV flange and BOV to purchase. I was thinking about the HKS (SU's Product Code: 71007-AK001). I...

I'm having my engine rebuilt and the technician brought in a fuel pressure soleniod. I can't think of any reason it would be a Mitsubishi part. My real question is, does anyone know where I can find either an aftermarket one or the original. I tried doing searches and nothing is coming up...

Anyone ever have problems or huge delays on getting their orders in? I placed an order on Jan. 30th, took them about a week to tell me not all the parts were in stock, and said they would be shipped 2/8/10. Currently still in "processing" and have no new news on what's going on with the order...

Recently had my turbo rebuilt and cleaned out all the pipes and made sure the lines were free of kinks and not blocked. Guess what, turbo is still pulling in oil and car smokes and skips. Awesome. So, called the company I had rebuild and check over the unit, hope I can find the receipt and have...

I just recently had the turbo rebuilt. Put the turbo, mani, radiator, intercooler, etc. all back together. Oil changed and coolant flushed. Ran the car for about 2.5-3 hours. Smoke seemed to be clearing. Looked for any leaks or potential leaks, found nothing. Took a dealer plate home and...

Ok, so I'm looking at having to replace the turbo in my MSP. The thing is, I wanted to go with the stock T25, however, it's going to be on back order until the end of August. I was told, I could just buy the GT28, problem being, I'm not totally familiar with interchanging turbos. So, here is my...