Search results

Hey guys looking for a good low miles T25 pm me if you got one.

So I know I have a boost issue where I can't get past 3.5 psi. The waste gate is fine and I can't find a vacuum leak. The other day I was driving and noticed while I was passing a truck I down shifted and went into 5th but I didnt let the clutch out right away. I noticed that the revs went to...

So I recently replaced a fewthings on the car waste gate actuator, MBC, and put on a forged motorsports bpv. I also replaced the boost gauge because it wouldn't go back to zero, with a new gauge that issue was solved. Now to the main issue I have the MBC almost screwed all the way in mainly to...

So I got a different boost gauge today(last one was a POS from the former owner) and am wondering why no matter where I adjust the MBC to I still read the same psi right now the gauge is hooked up to a vacuum line that runs from the top o the I take and is before the MBC. Just looking for some...

So I have to replace the waste gate on my car and from the looks of it the factory BOV. What I am wondering is if this would be a replacement (see link) or if there is a better option, I don't have the money do to a FMIC right now but don't want to have to deal with a boosw leak either. I would...

Title says it all just wondering is any STL owners are on here?

So for a little while now I have noticed my car not reaching full boost I do have a MBC and it has about 3-4 turns on it. Under full throttle it reaches about 3-4 psi and I know I should be reaching more than that since stock I should be reaching 5-6 psi stock if I read some other posts right. I...

So last night i was driving home and my car stumbled and the next thing i know i feel like i a, driving on three cylinders and my CEL is blinking. The car starts to run find and the CEL is solid, I got the codes pulled and I got a P2006 runner stuck closed and a P0300 random cylinder misfire. I...

Hi guys, I recently rebuilt my tranny because the LSD went now the ABS light is on all the time and I have no reveres lights. I need a solution to the problem since I need to register my car and have to pass a safety inspection.

Hey guys just got my car running again after the LSD snapped (made it to 105,559 miles). I have the driver side axle in but not the passenger side in just to see if it moved and the driver side axle doesn't. When I let the clutch out the car does rev and I do hear the gears changing inside the...

So my LSD broke today started from a stop and SNAP and heard a loud grinding sound, car has 105,569 on it. Anyways we are going to take the tranny out this weekend and see what is going on. I am 100% sure its the LSD but looking for other possible problems, also I will be replacing the clutch...

Did the 2003.5 MSPs come with tint from the factory? The reason I am asking is that I just got pulled over for my tint being to dark I have 20% but I can only have 35%. I bought the car used from the dealership with the tint.

So I have recently replaced my belts on my MSP and they still squeal. I am wondering what is the proper tension for the belts.

So today I went to get the plates on my car renewed and needed a safety and emissions inspection done. Well I found out the check engine light was on and it wasn't on when I got to the dealership and my Cat has a small crack. I need to know what to do about the check engine light, I have had...

Just wondering if anyone here is from Missouri? I am in St Louis, more or less in Ballwin.

Hey guys, a rock broke one of my fog lights on my MSP. I would like to do something after market on it, I know a while back I found a post about what kind of fog lights fit in the stock location but can't find it. I want to do something that will work but look good also, I saw some Catz fog...

Hey guys I'm working on my my car and need tips on how to get the alternator out. Its all unbolted and stuff just need to get it out. Thanks in advance.

Took the heat shield off the exhaust manifold to diagnose an exhaust leak and found hair line cracks in the manifold. Should I look into a replacement, or upgrade? Pics:

What made you buy and MSP out of all the cars out there? My reason is uniqueness, not that many made and I love the car, I can depend on it to start and get me to where I need to go.

So I was cleaning my MSP and noticed rust down along the bottom of the doors, has anyone else had this and is there a way to take care of it? I also had a sewing machine fall on my car...it's a long story, anyone know of any dent repair tools to fix them? they aren't that bad. The rust Dents