Search results

  1. N

    MAZDASPEED 3 / 6 HPFP internals, MS3 SPEC stage 2+ clutch, MS3 timing chain kit

    MAZDASPEED 3 / 6 HPFP internals, MS3 SPEC stage 2+ clutch, MS3 timing chain kit Hey guys, I decided to trade my 07 MS3 in a while ago and now need to get rid of the remaining parts I have stocked in my room. All prices include shipping and are obo. please contact me on here or email me...
  2. N

    WGA issue NEED HELP

    Ok I've had a stupid experience. To start of I was looking to get a little more boost out of my car. I decided to buy a Forge Wastegate, at the time i had an exhaust leak between my mani and turbo so i decided to have the mechanics put the new wastegate while they were replacing the gasket...
  3. N

    Stock alarm system question

    OK I was taking a look under my dash and I saw the harness connector for the little red alarm indicator light was not plugged in anywhere. Where does it get plugged in at. I'm not even sure if my car has the alarm system anymore...Kind of a newbish question but what would be the best way to...
  4. N

    replacing rotors

    I got my slotted brembo rotors the other day and idk if i wanna replace them myself or take it to someone. I did a search on it and couldn't find anything. Two questions 1. Is replacing the front and rear brake rotors hard (i've heard the rears are)? 2. Is there a how to on it at all? I'm...
  5. N

    Forged WGA

    Ok I bought a replacement Forged WGA and I requested it be assembled with a spring suitable for 9PSI and well I assume they did. I had it installed and I'm still hitting the same 5ish PSI i was before. Do i need to adjust the rod or is there something else I'm missing??? Thanks
  6. N

    coilover preferences??

    I was wondering what coilovers everyone preferes. I was looking at getting the BC coilovers and then I saw the megan ones. Which set would u say is better??? thanks,
  7. N

    rear sway bar squeek!!!

    OK I've had this problem for quite a while and my problem is exactly what the title is expressing. My rear sway bar is squeeking and is annoying as F@#$. I believe it stated happening after I put my Tein lowering springs. Basically whats happening is after some time the sway bar it self is...
  8. N

    Need Help!!!

    Ok, the other day I had juss finished a small race with a CRX when as I was going down hill i shift into neutral and my car died. So i started it back up and continued on my way when i came to a stop light i put it into neutral and it dies a gain. So start it once again and pull into a parking...
  9. N

    Cel??

    Ok i just finished reassembling my engine from a port and polish on the head and i installed a Hi'Boost FMIC and downpipe. I don't have the exhaust hooked up yet but when i took it out for a little test drive my check engine like started steadily blinking and then came on solid. Does any one...
  10. N

    Greddy Type-S BOV

    Ok i just finished installing my Hi-boost intercooler and it came with the Greddy Type-S BOV and I was wondering what you hook the bottom nipple on the back up to??? I've tried searching for it bout haven't found anything. Thanks in advance, Tyler
  11. N

    engine timing

    OK today I was trying to finish putting my car back together and I'm trying to time it and make this short I was unsuccessful. Can someone give me a little help with this. I have the crank at TDC and the tensioners loose. I juss cant seem to get it over both cam gears. Any help is appreciated...
  12. N

    Assembly help!!! PLZ

    Ok i've been looking for a while and I cant find the torque sequence for the cam cap bolts again. If someone could find me a it that would be awesome. Thanks, Tyler
  13. N

    cam gear??

    Can someone tell me the torque spec on the cam gear to cam shaft bolts? Thanks, Tyler
  14. N

    wastegate line?

    Ok i feel like a total noob (smash) for asking this, but I forgot where my wastegate vacuum line hooks up. That would be great if someone could let me know. Thanks, Tyler
  15. N

    rim size question need help???

    Ok I've tried searching but haven't found anything. I wanna get a set of Rota boosts and I want a set thats wider than stock, but they don't make the boosts in a 7.5 wide do they? If not, I want to get a set of 17X8, but I was wondering if I would need to do any rolling to make them fit with no...
  16. N

    AWR camber plates

    I was wondering if anyone knew if the AWR camber plates were pre stamped with the degree markings? I've seen some that weren't and i was juss curious. Thanks, Tyler
  17. N

    intake manifold

    I was wondering if anyone knew what the torque spec was on the bolts that hold the top and bottom intake mani. sections together?
  18. N

    intake mani???

    What is the torque spec on the intake manifold bolts that hold the top and bottom section together? Thanks, Tyler
  19. N

    Afc??

    OK.... So I've heard around that basically no normal afc will work with our gay-ass ECU exept for the split second one. Is that one of the only ones that will really work bc of our so called learning ecu? thanks, tyler
  20. N

    Vtcs???

    Can someone point me in the direction of the HOW TO: VTCS removal thread. I've been tryin to find it and not havin much luck. I pulled my manifold off today and saw exactly what it was and well I want it out. Pulling the VTCS won't set off any CELs will it? Thanks, Tyler
Back