Search results

I have been very lucky so far with my 2016 cx-9. I have a tendency to wait until the fuel is very low, usually near 0 mile left sometimes 20 miles below 0, before refill the tank. What you guys mentioned about the potential fuel sender failure is really a wake up call to me. Thank you.

Yes, but not without taking apart the entire dashboard, at least that's what the instructions show.

You should be able to simply pry it out.

Hi, It seems like you've got the CX-9 Touring with the premium option. Attached is the list of options I put together when I was preparing my 2016 CX-9 purchase. Hope it helps.

2016 - CX-9 - Brakes MAINTENANCE MODE NOTE: * When in maintenance mode, the clearance between the disc pad and the disc plate expands. * When the maintenance mode is completed, perform the electric parking brake automatic adjustment. * With the electric parking brake automatic adjustment, the...

The connector may hide behind the interior trim. According to the attached picture, it is not far from where the mirror cable goes into the trim.

The owner's manual clearly stated that front acc socket is on only when the ignition switch is at ACC or ON, while the rear socket is always on. Make sure you locate the right fuse, or you can tap from the front socket directly.

I would tap from the cigarette socket at the passenger foot well. It has a 15A fuse.

Tightening torque 15*20 Nm {1.6*2.0 kgfm, 12*14 ftlbf}

o Here are the diagrams for the keyless entry door locks. I believe these are US version. Not sure about the difference from the other versions.

Here are the instructions. https://www.mazdas247.com/members/jellyfish11/Front%20Console%20Install%20and%20Removal.pdf

Nothing is actually broken really. It proves how easy the commander switch can be removed (and installed). It sits in the front console all with clips and tabs.

If you take $100/hr labor into count, $498 is not too far off. I ordered the kit online for $163.66 and spent 4 hours to install it.

Actually some still do. Google C922-V6-605A (usb wires) and TK78-66-9U0C (usb hub).

Hi soal, I attached a few schematics about the CMU. Hope they'll give you some idea.

Hi Soal, Are you asking about the harness the center display connects to?

Hi， The center display and the cmu seem to be two separate pieces. Here are the instructions to remove/install the center display for 2016 CX-9. Good luck.

25 ft*lb should be fine. The 2016 manual says: Oil pan drain plug tightening torque 30—41 Nm {3.1—4.1 kgfm, 23—30 ftlbf}

I believe that is true when you are passing or being passed. When you signal to change lane, it will engage if there's a vehicle in the range no matter who is passing.

I don't really understand what Mazda marketing guys are doing. CX-9 definitely needs marketing boost. Its sales numbers don't really match the excellence of the this vehicle.