Search results

Just curious are these the same 2.5 engines that they use in the non-turbo cx-5's.

I was wondering if anyone on this forum has seen this type of container of fl-22.

So that silver box is the bluetooth module. Is the location the same on all of the first gen cx-9's. I have the exact same problem. I may have to go online also. Can you let me know if the replacement is working fine.

You are right. They only have the rear upper arm and the rear forward lateral link. I mentioned these because i figured that you might replace all of the components. Also siberian bushings are better as they are polyurethane and not rubber.

If you don't mind aftermarket, Rock Auto has the rear upper and the rear lower foward lateral arm in moog or mevotech brands.

When you get it done can you post the part numbers for the diff mounts. Would greatly appreciate it. I also understand what you mean. Sometimes we don't have the time and need it done right away. Let us also know how it turns out.

The alignment price is in the ball park as well as the tie rod end. An indy charge me 125 for one tie rod about 4 years ago.

they are charging you about 600 for labor. Even though it says diagnostics. It shouldn't take no more than 1 hour diag time. What is their hourly rate. You take their hourly rate and add the cost of the bearing which goes for about 150 on rock auto for the timken with delivery and probably tax...

avidien said: here's a quick write up on how I changed the CX-9 (AWD models only) transfer case 75W140 gear oil, Step 1. need to get some front ground clearance to get under the SUV, so I got some 4" thick solid cement blocks (they run...

There was a forum memeber by the name avidien who was on this site. He had detailed a procedure to suck out the old fluid and put in new fluid. He never had a problem with his transfer case. You should search for those posts.

My original one lasted ten years before it went.

That is the exact same noise that i am having. I had posted about this. I have pretty new monroe quick struts on the car. Tultra please let me know if you find a solution to this problem. It is very annoying. It is also on the same side the passenger side.

Thank you for the part number. I will be replacing that also. I was wondering what are your thoughts on the small leak coming from the hose that attaches to the plastic nipple next to the radiator drain plug.

The engine operating temperature shows 202 degrees on my scan tool. That is why i want to replace it. In the ford edge video that i was referred to here. After the owner replaced his thermostat his operating temp was 190 degrees, which is 10 degrees above the rating of the 180 degree thermostat...

Thanks for the quick reply. I thought the same thing but this is a shorter hose which runs to something else. I will try to take a pic of where it goes to. Do you think it is the hose or the radiator nipple. Thanks again for the reply.

I have a leak in the nipple that comes out of the radiator which is next to the drain plug. I squeeze the hose and nothing comes out,then i squeeze the plastic nipple same result. After a while it gets wet again with coolant. Is it the hose or the radiator. Also does anyone have a part number to...

Good Evening everyone. I was thinking about replacing the thermostat on my gen 1 cx-9 2007. I ran an estimate through repair pal and it listed the replacement at 708 to 731 dollars. Is the thermostat replacement that expensive? how much is the thermostat and is there anything else that needs...