Search results

SOLD: 16 steel winter wheels with Blizzak tires ($300) For Sale Set of four Bridgestone Blizzak WS80 studless winter tires mounted on 16 steel wheels. $40 Storage bags included. Wheels/tires were purchased in 2014 for my old 05 Mz3. Sadly the brakes on my new car are too large to take a 16...

Seems like you*ve already fixed it, but likely the issue was not having the little notch on the H7 lamp base line up with the same notch on the projector. It tends to fall out of place while you*re wrestling with satan*s headlamp retention clips. FWIW I*ve had the best luck with those clips by...

I had a similar issue after tapping wires in the maplights for some other interior lights/puddle lights under my mirrors. I ended up wrapping a zip tie around the wires at the plug into the back of the maplights, and hooking it over the frame of the mount. For some reason the ground was wonky...

Glad that I never read this thread........ I've had a hatch mounted bike rack on my 5 on and off for the past two years. Did a 8 hour drive with one full size, one large kids bike and one itty bitty one. A couple of local trips with 2-3 adults bikes mounted. Never had any issue with the top...

Valentinmtl I never did get around to tracking which wire in the fuse box needs to be extended to the doors, and never heard back from MarioT. While I was dithering on that project someone clipped my driver side mirror while they were busy running a red light. Broke the glass with the heated...

Used a set of Blizzak WS-80's on my '05 Mz3 last year and they were wonderful. Got a set for my new 5 for this year........ so I'm ready whenever winter decides it isn't taking the winter off.

If it's anything like the 3 or the previous gen 5 then it's silly easy. Jack up each rear corner and put on stands, remove the rear wheels. Remove one large bolt holding the bottom of the shock onto the hub. Remove the two nuts holding the top of the shock onto the upper mount (will need a...

It's possessed. You'll need a young priest and an old priest....... also a really long flight of stairs.

Question for you. Did you buy just the skeleton and swap over all of your hardware (buttons, airbag, cover)? I'm curious because I installed a pioneer carplay stereo. The paperwork with the steering wheel control adapter specifically states it utilizes factory steering wheel controls and...

It's one of those things I'd like to do one of these days, but I really don't want to blow several hundred dollars on an OEM wheel. I miss the leather wheel in my 3. :(

Like some have said, the quality and materials of the tint have as much to do with the benefit they provide the car as does the VLT. Most metallized tints are cheaper and people tend to go darker on them. Ceramic based tints are generally more expensive and block a much higher percentage of...

there are three clips on the bumper cover which slide into holes along the seam where it meets the fender. Then there's a single bolt in the upper rear corner of the bumper cover which goes straight up (looks like you have that spot pictured there). AFAIK the bolt is the same as the ones which...