Search results

they are nice for the price with the amount of features but for me. its the reliability and parts falling apart. i had a family member that had a 2018 Hyundai with only 60k miles on it that had burning 1qt amount of oil at 5k miles. most of the interior was already wearing while my 2017 mazda at...

so the back up battery connect to all 3 wires with is const, acc and ground. i only need to connect the acc and ground to recharge the battery when i drive the car. with the radar sensor on my car and left parking for about 12 hours. it only took about 5 to 10 percent of the battery and get...

here is how it should be connected just in case. The F770 is my first dashcam that was hard wire with a cutoff of 12.3 and still has problems. After that, i got the backup battery and change the dashcam to the u1000 and never once i got a problem but the backup battery dead in 4 years but got it...

I understand but once it is connected the right way and ensure that your getting power base on the fuse tap kit as it should only receive voltage from one side as both of the other side is split. once goes to the ACC out and the other goes to the fuse box. it shouldnt jump to the other side...

The reason was because even when i have set my dashcam cutoff voltage. I notice my battery dead sooner which was about 3 and half year and had to get a replacement. there was also time that my battery would completely die and i wont be able to start the car. this happen on my 2017 cx5 when i got...

Yeah i saw the part number but didnt know the treads. Thanks alot

I am not even sure myself as all i did was tested the fuse and tap in to it with an 15amp fuse. as long as it is connected correctly it shouldn't interfere with the other component as your just using a wire that is connected to your positive battery terminal. ill take a picture of mine once i...

The reason why it start and stop is because of the I-stop feature. I was also told to bring it to the dealer but this is a software issue and im sure they couldn't do anything to fix it besides inform the one in charge of the istop feature from interfering with the wireless charger. I have...

I run a hardwired to the fuse box at the kick panel as for the rear camera, I just ran the cable under the roof interior to the a pillar to the front. I didn't tap any cable.

Hopefully someone would know which one is needed as i can order to have it ready before my first oil change as this is a new engine. Not like the 2017 cx5 that i had before this one which i took apart to look at the thread to ensure a perfect fit.

Here is my experience that i want everyone to know and i hope this gets out to the mazda officials as this can be updated and changed. the i-stop will stop your wireless charger and re-activate when your engine re-engage and the only way to bypass this is to fully dis-activate the i-stop...

here it is, the thinkware U3000 with 15% for front and rear tint (including oem tint) and 5% At the C piller and back glass.

I was able to install the new U3000 Thinkware dashcam. I am planning to put an a Fumoto oil drain valve but since I haven't open the drain plug yet, I don't know which one to get to ensure the thread fitting.

this is the only 2 item you need for an alarm and remote starter also you can add in a shock sensor which i did also. http://www.ebay.com/itm/Fortin-EVO-MAZT1-Preloaded-module-T-Harness-combo-2013-Mazda-Push-to-Start-/351776707312?hash=item51e78692f0:g:tpsAAOSwzJ5XfPY4...

get fortin mazt1 with the flashlink and install it yourself. that is what i did but didnt know about this site. i would have posted up a how to on installing it. edit. if anyone need help on installing this just hit me up. ill post the picture on where to locate all the wires as well as...