Search results

Bumping. I've an exhaust leak that failed inspection - good excuse to buy a system - aside from the above - any other suggs?

Bump anyone also running into this

bump

Hello has anyone else had this issue? Driving along, and then it feels like the clutch pedal just "falls down" is is sticky in the depressed state. You can kick it back up to keep driving but it doesn't seem right. Looks like in general folks have bled their fluids, or its generally a...

Hey all, my car just got a lot meaner and groans when accelerating. The shop said the pipe connected to the turbo has a hole in it. Do I need to replace this (they said it was cast iron) or should I try a gasket first? If I were to replace this, where can I buy the part?

Probably too late but before you ditch perfectly good calipers as i did, start with the $20 rear brake rubber hose

Did yours rust over too?

spot on, Natey. Just FYI to close the loop, it was a loose connection with my clutch safety switch after the clutch was replaced - in case someone runs into the same issue.

Just FYI to close the loop, it was a faulty connection to my clutch safety switch after the clutch was replaced - in case someone runs into the same issue.

any idea on the part number for a 03 mazdaspeed protege?

battery is new. this started happening after the clutch was changed. in a video i saw that there was some relay for the clutch/starter in the fuse box.. wondering if that could be it (?)

Hey guys, just wondering if anyone else has experienced this - when putting in the key, and turning the key, there is a delay before it starts to crank. As long as it cranks, it always starts, but often times there is at least a 2-3 second delay. Any guesses on what this can be/ what the fix it...

Hey guys, my car has a delay before it starts to crank. Thinking it could be the starter relay - does anyone have pics of where it is located? The image from the 2014 post is gone.

would you sell a racing hart rim? One of mine is bent :(

would you sell a racing hart rim? One of mine is bent :(

Bumping an old thread. Does anyone have pics of where to apply the RTV?

And to close the loop - its FRC11551 and FRC11552 for the rear calipers.

Just in case anyone searches this in the future, I bought FRC11813/FRC11814 - they are not the right fit, guessing its for a P5.

Hi all - hoping someone can help me with some ideas. All I have modded is an Injen intake. After heavy acceleration (WOT here you can hear the turkey) if I throw the car to neutral, the RPMs will drop down to 0 where it may/may not stall out. Any ideas on what to look for? TIA!

Hello - if its still available, please can I buy your wheel caps and the screws? I think each one has 5 - if I remember correctly its a hex screw (?)