You can get a switch from other Mazda's, protege is what I used, that will fit in the blanks to the left of the wheel.
Then you will need a wiring diagram to know what wires to tap in the steering column.
I used the switch for my after market auto lamps. I have an extra for fog lights when...
You are also putting a 'used' part on the car at that point. This could be seen as a liability if the part is not intended to be reused once removed.
I asked if a dealer could swap out a center console with another car on my wife's last car and was told no. Lots of reasons given including...
The maintenance schedule says to replace the spark plugs at 75k miles. I am at 78; and being better gas mileage than ever. 23.9 in around town driving. I don't want to mess this up. Should I just leave it alone till there is an issue?
We are in little rock dealt with crain. Superior was a thousand less. Crain nor Mclarty had the red my wife wanted in stock. Superior was easy to work with, whole thing was by email.
This was the second time crain has lost a sale to us. When I bought my 5 in 2011 I could not find a manual...
You may not ever have a problem. But the rim offset is to center the wheels on the bearings in the hub. When you change this, there will be constant pressure on the bearings that can cause premature wear.
We have a 2018 GT. Has anyone added the remote start that uses the phone app?
If so, did you do it yourself?
How hard was it?
How much did you pay for it?
Do you like it?
No red on the signature in the US. Its a good thing too, my wife only wanted red. We still need to pick ours up, 3 hour drive one way. But it was $1300 less than the local dealer.
Can someone help me. My Miata needs new seats. How wide are the front seats in a 2? There are a few in the junk yard close to me but I did not have a tape measure with me that day. Maybe some pictures of you can. Thanks in advance.
Philip
Sorry, I did not take pictures.
After you have removed the battery compartment, and the lines are disconnected from the master cylinder, break off both nipples from the master cylinder as close to the cylinder body as possible. I used a screw driver and stuck it in the nipple. I ended up using...
We had 12 degrees Monday morning. I figured the seals/o-rings failed. But no it has not been flushed. Have 63k miles on it.
Sent from my Nexus 5X using Tapatalk