Search results

Please email me, thanks!

If the hub is humming then most likely needs replacing. If two shops said it can't be aligned then it is certainly because of the subframe being bent somewhere. not sure if a shop will do a subframe pull on it but if they can get it into spec there are usually "crash bolts"' and things they...

sounds like your frame/chassis is bent. Obviously it is not a rail frame but a unibody where all parts connect to shaped sheetmetal. that's why they said it cannot be replaced and probably not able to be repaired. Guess its your deal as to why insurance wasn't involved but it may have been...

17x7 Racing Harts from the Mazdaspeed (MSP) now on my Mazda3 GT hatch These forged wheels should be way stronger... TPMS installed and factory fitment. Could use a small spacer to push them out a bit but not really necessary. I'll worry about that once its lowered.

that's not supposed to be there....

I'll just put them on ebay then. Cancel the thread if it needs to be. I sell plenty of random stuff on forums and ebay and have no security issues with Paypal protection. I'd sell cheaper here but just I looked at the forum requirements and I'm not going to send all that stuff to some random...

I only have a 1.6L that I can do in gloss red. It would look like the red BMW VC I posted above. I'll hopefully get these finished up this weekend. May find crinkle red for future use.

yep, amp is gone to a new home. Here's the box. It fits rather flush, the one pic shows it pulled out some so you can see how it goes in.

I finished all cleaning prep and paint today. Curing now for the next 48 hrs. Not good pics due to a dark garage and a bright flash. Looks less glossy in person. Glamour shots for ebay to be done in daylight. I'll be sanding off the raised lettering on the 1.8 to let the raw aluminum letters...

I'll be doing the 1.6 and 1.8 in crinkle black tomorrow. Will post pics.

I've got black crinkle and gloss red ready to go, will be doing one of each on the 1.6 shortly

Too big to ship to Canada for a sane price

Two Miata VC ready to be cleaned and painted and one BMW M42 VC already painted gloss red. I've sold two Miata VC in red but didn't keep the pics.

"to fit in the passenger rear of the hatch." Take the jack panel off, take jack out and the sub fits along the wall and bolts in where the jack holding bolt is. Install speaker and you're set.

Make sure you are all looking at the amount of power needed to push those JBL and Alpines. A lot of aftermarket speakers have "no lows" because you really need good clean power running to them, not just headunit power. Try a 2 channel small amp and it'll make those things jump. Plus, you need to...

$75 per valve cover. Painted Crinkle Red or Crinkle Black. I'll do gloss if you like as well. High Temp ceramic paint. Currently I have two 1.6L valve covers and one 1.8 ready to paint. If you hit me up ASAP and have a different color preference then let me know. Blue, Yellow, Green etc...

Miata parts, all from early NA: Door speaker grill cards - $20 A/C button and switch blank out plates $2 each Weighted OE shift knob $15 Instrument cluster 140K no scratches or cracks $40

more pics