Search results

I'm running around catless and had been throwing CEL's for a non-functioning cat (DUH!!). The car seemed to be driving worse, so before i bought a high flow cat to be welded onto my test pipe i decided to try an O2 extender. I installed the extender along with disconnecting the battery(reset...

Background Information 1. Mechanical Sunpro Boost gauge 2. Power wire is connected to cigarette lighter power source. I also tested with the power connected to the constant power wire(red wire) from the wire harness behind the steering wheel assembly. 3. Ground is connected to left panel to...

here's two crappy pictures i took with my cell phone(my d.camera is broken @ the moment). I'm only going to use one pod @ the moment and right now I'm at a crossroads. (by the way I have the wire for the gauge completed inside the car) I could use bondo, sand paper and paint/primer to blend the...

upper portion of middle dash, angled toward driver

will post after paint dries today

I got bored today(dead week) and made some guage pods today. I used an acrylic sheet, 2x PVC 90 degree straight couplers, bondo, primer, paint, and tools. The process was very time consuming but I saved myself quite a bit of time on the 90 degree straight couplers. Fortunately, i had a mouse and...

the same thing happened to me, the weld failed in the same manner, http://img132.imageshack.us/my.php?image=weldbrakepv1.jpg , i spoke with Mark and he took care of me.

I installed the turbo xs hydrbid valve a few days ago. The car idle fines..but it has backfired a few times since i installed it.

I purchased the Greddy EBC and Greddy TT this weekend for a really good price off craig's list but I'm really debating if I want to to install them. I know the TT is fine but I'm real iffy on installing the EBC, as I really don't want to screw up my car by toying with the boost levels without...

The test pipe that broke was the one you have pictured but Mark really took care of me after it happened.[/URL][/IMG]

i havent gotten any CEL with the turbo xs rp/dp setup but assuming you won't get them with the CS DP/RP combo, I'd go with the CS setup b/c the CS rp has hangers.

Save yourself the time and headache to have it installed. $100-$150 to save 7 hours of your time and potential problems. Installation looks like a nightmare without a lift too. I'd recommend having hangers welded on to the race pipe too (the torque from the motor pulls the pipe forward, I had a...

Here's my gameplan so far. 1. Order intercooler (28" 7" x 2.5"), completed 2. Order Aftermarket Hybrid BOV, (ordered Turbo Xs hybrid valve Type H) (car supposedly has issues running complete VTA), completed 3. Order 2x universal aluminum intercooler piping kits with pipes that are 2mm thick...

Can anyone provide a decent picture of FMIC piping being connected to the turbo manifold? What is the diameter coming from the turbo where the fmic piping is connected and what is the diameter where the fmic piping connects to the turbo manifold?

I'm going to attempt to do most of the work myself, i have my intercooler 28x7x2.5, my blow off valve (turbo xs-hybrid valve-type H)should be here shortly within 3-5 days. I'm ordering my intercooler piping(aluminum beaded, 2.5") along with silicon couplers, reducers, clamps, etc.I've been...

Personally I'd rather spend $100 and let someone install the DP&RP together and enjoy the rest of my day off doing.

I haven't gotten any CEL's with the turbo xs RP & DP

Title of the thread says it all, I'm asking $170.00 for the credit. Sorry FOR NOT HAVING any signage but taking a picture of something intangible is impossible.

Got the car up in the air today, The test tipe pulled apart into two separate pieces. The failure occurred where the flex joint(mesh/crimped) is connected to the flange that mates to the stock cat-back exhaust. Apparently, the test pipe was welded incorrectly. My mechanic believes the lack of...

The driver seats feels like I'm sitting in a vibrating message therapy seat due to the vibration. My night has been ruined, I was going to pick up this sexy bartender and chill now I'm stuck at my place reading Elizabethan Theatre and doing a prelab.