Search results

Thanks Gremlin. I took a look again last night, and ended up just routing my wiring without removing the panel. It was a pain, but it is done. I am still baffled on how the panel comes off. I pulled up and no go. I pulled out and no go. I was able to pull the top part out about .5"-.75", just...

The heated seat relay is used as it is the easiest. Lots of other options. Find any "key on" 12v source. Some have used the green park light wire.

To bad. They are 8mm.

They don't pull or lift out. Any tips? Mitchell's is very vague and one listing says "pull" while another says "lift", then another says you need to turn the upper clip? Just need it out of the way to run some wiring and re-route an old wire I ran across the air bag.

Not sure. I will measure one when I get home tonight.

Rubbish. Yes I have. https://mazdas247.com/forum/t/cx-9-headunit-upgrade.123877383/

Get out your volt meter or test light and find the "key on" power at the heated seat relay.

Those are adapters, M8 to JST, that came with the controller. The round end is M8.

Searching got me this..... https://mazdas247.com/forum/t/oem-bluetooth-microphone-with-aftermarket-stereo.123838998/

Good thing there are no aircraft(s) on the roads, around here anyways. 😂

Install the new mic and put it in the stock location. Doing anything else will make you pull your hair out.

Yup. But at least it looks good. :ROFLMAO:

Thanks. I originally got the idea from my parents 2013 Escape. I did a simpler version on my last ride and quickly found that I missed it on the CX-9. It is so nice to have it again. The added bonus is for the past two years I have had a prosthetic right leg, so being able to see the pedals at...

Had some free time and some energy over the weekend, so gave the 9 some love, which meant finishing off a couple of projects..... Replaced a burnt out shifter light. Installed of a USB/3.5mm hub for the Kenwood headunit. Installed some footwell lighting; just wanted red...