Search results

  1. 5

    GI: 505 Intake Manifold Round 3

    Looking more and more like the plenum is going to stay square. Since the first way of doing it failed, I've come up with 3 different alternatives, and all of them have their own issues. I think the only way to make it work/fit right and still look clean would be to just machine the whole plenum...
  2. 5

    GI: 505 Intake Manifold Round 3

    Clearance issues with the brake booster and brake fluid can. Working on it.
  3. 5

    505 Cold Air Box Round 2 *GB*

    Please everybody pay attention to step 2. I know most instructions tell you to disconnect the battery just as a BS liability disclaimer, but in this case it is completely mandatory.
  4. 5

    505 Cold Air Box Round 2 *GB*

    Install instructions sent to everybody that is shipped so far.
  5. 5

    505 Cold Air Box Round 2 *GB*

    Functionally, the only difference is that it seals up to the vertical drivers side radiator support instead of the headlight. I didn't see any change on the gauge during temperature testing.
  6. 5

    505 Cold Air Box Round 2 *GB*

    7 kits are shipped, and we're all sold out. Thanks again for another great GB folks. <3 1. Hammo - 4" kit, black, BPV yes *SHIPPED* 2. msp14 - 3" box + piping, black, BPV no *SHIPPED* 3. atlracer25 - MSP kit - black - BPV yes - relocated MAF *DEPOSIT PAID* 4. gangstagangsta- 3" kit - black -...
  7. 5

    505 Cold Air Box Round 2 *GB*

    Sorry for being slow this week fellas. I had some major stuff going on and was just finally able to get away from it all and knock these kits out. I test fit every single one on my car. And I rejected 6 lids from the anodizer because they weren't ok. They went ahead and redid the entire batch of...
  8. 5

    505 Cold Air Box Round 2 *GB*

    Still my favorite N/A setup from the DIY pipers. I've even modified the lone N/A setup from this batch to be a blend of your's and the original since it looks so good. :)
  9. 5

    GI: 505 Intake Manifold Round 3

    (rockon) (rockon) (rockon) (rockon) (rockon)
  10. 5

    GI: 505 Intake Manifold Round 3

    Major progress today. I'll let the pics do the talking.
  11. 5

    505 Cold Air Box Round 2 *GB*

    Forgot to add that I have the installation instruction photos done as well, and I will PM that to each of you separately as soon as I get the pics uploaded and the steps typed out.
  12. 5

    505 Cold Air Box Round 2 *GB*

    Score 1 for the good guys! I am already working on getting trim installed right now. Hopefully will get that all done along with fasteners put in and window glass glued before the end of the night. I will be PM'ing each one of you directly with your final balance and shipping cost by...
  13. 5

    GI: 505 Intake Manifold Round 3

    Yes. I don't have the exact figures yet, but it will be something close to half down or $500 down and the rest can be paid off over time.
  14. 5

    GI: 505 Intake Manifold Round 3

    For now all I can say is that they are optimized. I will post numbers when we move this to the actual GB thread though.
  15. 5

    505 Cold Air Box Round 2 *GB*

    Had a little delay there with the lids getting bent wrong that had to be fixed, but will call and tell the anodizer to hurry it up.
  16. 5

    GI: 505 Intake Manifold Round 3

    Should be getting the new components late this week or early next week.
  17. 5

    505 Cold Air Box Round 2 *GB*

    Boxes/pipes are FINALLY done. Picking them up this evening and will post some pics. I'll get them cleaned up for anodizing over the weekend and drop them off Monday.
  18. 5

    505 Cold Air Box Round 2 *GB*

    Everything is here as far as trim/fasteners/etc. Boxes are all bent, but as of Friday were not finished being welded. Pipes are all 100% prepped and also still at the welder. I was told he would try to get as much done this weekend and early this coming week as possible. Shipping boxes and...
  19. 5

    505 Cold Air Box Round 2 *GB*

    Sorry that I somehow missed this earlier. The 3 extra boxes are all doing to the anodizer with the rest of the batch, but the piping kits are made to order. If you'd like to get a box that is NOT black anodized, then I need to get a deposit before the end of the weekend. I also do payment plans...
  20. 5

    505 Cold Air Box Round 2 *GB*

    1. Hammo - 4" kit, black, BPV yes *DEPOSIT PAID* 2. msp14 - 3" box + piping, black, BPV no *DEPOSIT PAID* 3. atlracer25 - MSP kit - black - BPV yes - relocated MAF *DEPOSIT PAID* 4. gangstagangsta- 3" kit - black - BPV no *DEPOSIT PAID* 5. Woody1969 - 3" box + filter - black - + additional...
Back