Search results

All vehicles have different brake feel. Only thing you can do is bleed the brake calipers to see if any air bubbles come out. What year is your vehicle and when was brake fluid last changed?

Agreed. I pushed the positive cables out of the way and was able to slide the battery a little forward and right out.

Both my 2018 and 2019 do this too. Kind of annoying.

i have no trouble reading the dipstick on my 2018 or 19 cx5s. Make sure you read the correct side as one side will have a higher reading you describe.

Just bought a new battery from Costco for my 2018 cx5 sport, $119.99. Original battery was still cranking pretty well, but it was registering consistently below 12.4 so I felt it was time at over 5 years. Costco warranty is 36 month prorated. Guy said people were bringing batteries back toward...

I dont have these on my cx5, but I did put them on my 04 Porsche Boxster. No issues, seem like good quality. I used the powerstop evolution.

I used 5.2 quarts on my 19 touring and I was almost to top of dipstick. at 5.5 you’ve got plenty in there, a quart over what’s recommended In the manual, which we all know is too low.

Which model years are people complaining about? I have felt some looseness on my 2019 at highway speeds and always felt it was grooves in the road or an unbalanced tire. I dont have any noises/clunks. I rotated my tires not long ago and it seems to have improved, but I’ll definitely keep an...

Seems something that was metal and welded would be ideal. I have used the blocks i linked to on my Quickjack and it’s very stable. the pinch welds haven’t bent at all. I think when you lift, the sides of those blocks combined with the downforce from the weight of the car prevent the welds from...

not sure I’d trust anything that wasn’t one solid piece. I just measured my pinch weld, it’s 1”.

I haven’t seen one that deep. If you find one, please post a link. If you can find a tall block, maybe you can cut a deep groove into it. my Quickjack came with big blocks. Suppose a 1” deep groove could be cut into them

Sorry, not following your point. The block has a groove that the pinch weld goes into. Are you suggesting you want a block that fits into the groove that is deep enough where the sides come in contact with actual frame? I’ve been using the blocks I linked to for quite a while with no issues.

Tire rotation and oil change on my 2018 sport using my 5000tlx Quickjack! Love that thing.

I put 5 quarts in and at around 7k miles the oil light came on. Put 5.5 quarts in the next time.

Thx. There is this tab on mine toward the top of the arch. How is that removed?

Anyone remove and replace the driver side rear wheel arch trim on a 2018 cx5? I think 2017/19 are the same. I have a couple of fasteners that broke off it and so it needs to be replaced. There is what appears to be a latch around the top of the trim, not sure yet how that is removed. I’m...

Your initial post suggested you didnt want to spend $40. You can spend half that amount at Walmart or local auto parts store.