Search results

https://photos.app.goo.gl/v7Jp1Jf1wkYgmZdSA

Where in az you located? I live in AZ and have stock P5 lights I'm willing to sell. I can clean em up a bit and give a picture in great condition.

I do not. JB weld is great but I wouldn't trust it that close to the engine and possibility of it getting sucked in. Just get a bolt to plug it up.

Well it's only air, I only plugged the big hole on the side. Took a bolt just barely fit and a power drill and just screwed it in then back out to make thread marks then put on locktite on it and then back on. It's been holding for 2 years now.

Did you install another Intake Manifold or take out the VTCS? MP3 ECU doesn't read that sensor only the VICS. So youd want to take that out to get better airflow. https://www.mazdas247.com/forum/showthread.php?123855397-You-know-what-needs-to-be-a-sticky

I did disconnect the battery first to make sure it wasn't a fluke haha

It has 3 long 2 short flashes but I don't have a code reader. But I had some one check for me and they couldn't find a code.

No code unfortunately. Also I can't read that last post picture. What fuse should I check for that may have gone out?

I looked this up and people said they just cleaned them and it went away. I tried that but didn't help, they looked very clean and wires didn't feel loose. Is there something else I can do or do I have to service the airbags.

What's the black part towards the top where the knob would be?

Do you have the fog deletes for the lip and if so willing to part ways with them ?

Ok guys I forgot and misplaced some info, I need to know the smaller fog lights to put in with the MSP front lip. I know they're smaller fog lights but can't remember the size. If you have some in there and have a recommendation for me that would be great. Funny thing is I actually might sell...

PCB, its called weight reduction bro. Geez.

If your going to do the non fouler just get a 4-1 header too. But the non fouler is super easy, just need a good drill.

He should of cleaned it before posting it. I wouldn't wanna get into that thing.

I will try and take better pics. I did use 3m double sided tape. It for some reason doesn't want to stick in this one part.

It's a MSP front lip on a 03 P5. It just sits around the edges of the fog lights weird, I will check out the suggested links I just something with great adhesive.

Yes I scrubbed both for about 10 minutes each too with soap then warm water let it dry them applied the 3m and it stuck great on the lip but after I applied the lip to the bumper and left it over night then put it on the next day drove and wound up with what you see in the pictures.

https://photos.app.goo.gl/mrkhXQWjHm73WUfG3 https://photos.app.goo.gl/ZLmL4dOVQGv4j4P43

It's mounted it's just not flush the 3m tape is like stuck between the two. I would use screws if it looked dope but it doesnt. I might just use light glue/ apoxy that I have here at the casa but I won't use screws.