Search results

Digbicks1234 and CX-5um, I appreciate both of your comments. Digbicks1234 - No, your breaker bar and ratchet aren't going to fit. My breaker bar with the socket was twice as large as the amount of room there was. Even the Harbor Freight serpentine belt tool with a 17mm socket was too thick to...

Yup! Lack of access made it impossible to guide the belt as needed for the zip tie method. And the shape of the water pump pully along with the tight clearance would not allow use of the tool shown. The water pump pulley is in a really sucky place on the 2.5L, the 2.0L seems to have better access.

OK, so I was mostly successful today. I went through the wheel well again. Once I realized how much force was needed and how slow the tensioner would move (courtesy of those videos) I was easily able to relieve the tension and remove the serpentine belt. I used my long-handled 17mm ratcheting...

One question I have is has anyone on here popped out a plug from a brand new 2.5NA and seen what Mazda is installing now?

I bought the long special Tensioner Wrench at Harbor Freight. $15.19+tax after my 20% off coupon. I'm going to try again on Sunday.

Maybe put a dryer sheet on top of the cabin filter. If a smell is going to be coming in, at least it'd be one you selected!

They have GF6 in all their other oils, but they are not going to produce the Zepro line any more.

Look at a bunch of those online and the common complaint was they broke. Twisted the square socket head right off the body of the tool.

I had used the Mazda Moly oil in my CX-5 from new until I learned on here that the Idemitsu Zepro Eco Medalist was actually the exact same oil. I started using that instead because it was available in a 5 quart jug for around the same price (and sometimes less) that the Mazda branded individual...

Here's a larger pic to show the cracks. I guess we'll see what happens.

The wrench I tried to use is 18" long. It has a ratcheting, swivel head with a splined profile insert. The ratchet "catches" after just 4 degrees of movement. This is the set I have. From the top, I managed to engage the 17mm tension relief hex thing from the top, but there wasn't enough...

I haven't taken it to my mechanic yet. But I will ask for the old part when I do.

They are made in Thailand, not Taiwan.