Search results

My 08 Speed3 with a bit over 17K miles had a "click..click" from belt tensioner so thought the bearing was going but on inspection found a small rock stuck in one of the pulley grooves. Removed it and no click now. Someone else posted this as the source of his noise. Not sure why a rock on a...

The ad has been removed from Autotrader w/o me getting any response back...scam or for real, who knows.

Thanks, Nate, .......makes sense.

$7,700...averages about 30k miles/year, a real workhorse !

06 Silver MS6 with 133k miles in Glen Allen, VA for a low, low price !!! Anybody familiar with this car or is the owner a poster on the board? Thanks for any help...

The "too wide a tire for a stock rim" argument aside, many claim the 235/40-18 will fit on a stock suspension without major rubbing except when car carrying a rear load or over major bumps and than fairly minor...some claim no rubbing at all (the rears are the main culprit) probably since they...

I had the same problem..Carbotech pads..don't run the spring piece without the clip on the pad 'cause there is a chance of it coming off. Carbotech had these pad clips and retrofitted them. If you are a do-it-yourself type, Dremel off the pounded in rivet on the old pad without touching the...

Yeah, it's the 15mm taller part that I'm worried about.........vs. the stock 215/45-18's

Looking at a set of Blizzaks on eBay in this size, 225/55-17's, and wondered if anybody had fitted this size without them rubbing from being too tall. Would be on 17 x 7 rims with a 45mm offset.

Understood..already have a case of MS3 OEM filters.

Understood..with my preferred Customer price I can get the 2 cases for $184.83 shipped so savings of a bit less than $5.00 over your price or 2.5 % less...probably need at least a savings of 10% to be attractive. Thanks anyway.

Is that the price shipped..?.My price is 169.20 for 24 quarts of 5-30W plus 18.75 shipping. What is your total shipped to ZIP 28768? Thanks

Had hoped to hear back about whether you went with the "local" buyer you mentioned the other day.

I PM'd you..Let me know. THX, Craig

I find it hard to believe those front stuts were inserted into the front spindles without a trace of scratching or single marring spot on the paint..CheifsMS3..what's your secret ?

A glimpse of the instruction sheet shows some drill work going on...do you need to drill out the rear upper mounts on these too?

Per my Scangauge, the AFR is a bit leaner at WOT with the Corksport intake download compared to the CPE Nano...both worked well overall but like the slightly better mpg's with the Corksport.

I down loaded the new Hypertech downloads re: the various cold air intakes about about 6 days ago. I have a Cobb SRI...downloaded the CPE Nano first...after about 3 days of driving the long term trim was - 6.3. Tried the CorkSport download and the longterm trim was -1.3 so will be keeping with...

Chris, Can I presume this update will be compatible with my Cobb SRI ? Thanks

So even though the stock pads on my 08 MS3 says "ATE", they are Ferodo's?