Search results

chdesign - I would use the same size as your turbo's oil outlet. Most are -8AN and that's what we're using on ours. Cheers. -Shawn

LaZaBLuEMp3 - We are using the Apex-i AVC-R unit. The display unit is mounted beneath the radio. Cheers. -Shawn

Kooldino - A returnless fuel system does not have a fuel pressure regulator or a return line from the fuel rail back to the fuel tank. Cheers. -Shawn

chdesign - We have not gotten any O2 related CELs with our setup. We have both stock cats removed and both O2 sensors are on the down pipe (one above the other) just before the 90 deg. bend. We do have a 2.5" turbo-back exhaust with a high-flow cat sitting where the stock resonator used to...

deepcover6 - Since the intermediate shaft and hubs are the same on both cars, you can assume the MP3 axles can be used w/the MSP LSD. The MSP has larger axles as a precaution to prevent broken axles. You may or may not need MSP axles; it will depend on the amount of power you have and the...

ArkosP5 - You do not need the MSP axles to use the MSP LSD. If you plan on boosting your car, then the MSP axles would be a good idea. The difficulty of the project depends on your mechanical abilities. If you know how to change your own clutch, then this would not be much more difficult as...

Hey Everyone - Let me just clear up a few things: - The List price for the Diff./Ring Gear is $565.45. - The Diff./Ring Gear is not available for sale yet. - The List price for the Right Axle is $421.60. - The List price for the Left Axle is $438.85. - The Axles are not available for sale...

deepcover6 - Thanks for the kind words. The front brake kit is actually made by StopTech. More info. on this kit can be found here: <a href = "http://www.mazdaformance.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=100&Product_Code=83-547-4300&Category_Code=763">StopTech Front Big Brake...

Hey 1st MP3 in NH, Sounds to me like the guys at the dealership did more than just check out your car. I would say they owe you a new clutch and a free install. BTW, we're using the ACT HD/SS clutch and Fidanza flywheel and have no complaints about the combination. Cheers. -Shawn

big_ben - Terry's kit made almost the same power as ours did, but at only 6 psi. That is impressive. Imagine how much power he would make at 8 psi with the proper tuning, whoa. Our T28 ball-bearing unit is smaller than their unit, hence the similar power numbers at the different boost...

falkofire - We do plan to make a kit based on this prototype. There will be some revisions to the prototype before we decide on a final setup to produce a kit from. APEXistud - We have not ran into any problems with our manifold. Kiwi Fabrications does extremely high quality work, and I do...

Hey Everyone, Well, we've finally put our protege on the dyno. This was a long time coming, but we had to work out a few bugs before we felt comfortable putting it on the dyno. By the way, all numbers are SAE Corrected. First, a little background info. on the car's motor/tranny/turbo setup...

Hello, Use the Pierburg fuel pump, as per Corky's recommendation. Since the stock fuel pump and fuel filter are located in the gas tank, the aux. pump cannot be mounted before the fuel filter. Mount the aux. pump on the firewall close to where the factory fuel line comes from underneath the...

Oops. The correct part # is in fact 0000-8Y-C07 --> List Price: $85.00. Doh! Cheers. -Shawn

We have them on our project Protege. The ride is a bit stiffer, but that's what you want, right?;) Go here for pictures of what the ride height looks like: http://www.mazdaformance.com/HAS2002.htm Cheers. -Shawn

Manuel, The front brake kit is made by StopTech: 2 piece 12.9" vented and cross drilled rotors with 4 piston Brembo-style mono-block calipers. Yes, we sell them. Retail is $1,795.00 for the kit. Later. -Shawn

The GC kit comes with Eibach ERS springs. We are using the stock MP3 Tokico shocks with the GC kit without any problems. Cheers. -Shawn

Here's the correct P/N: B30P-51-9k1B --> List Price: $36.20. Cheers. -Shawn

derrick1623 and NYCZMP3, No plans for the grill as of right now. One project at a time. -Shawn

Hey Everyone, The spoiler will look like the AutoExe piece, but will be made of a high-impact plastic instead of the ABS plastic. The high-impact plastic will not crack or break apart in chunks like our AutoExe piece did in its encounter with road debris. Unfortunately, they will not come...