Search results

Awesome install! Does anyone know if Proline operate anymore? I can't seem to get through to them.

The way that I wired it I can use my fog lights whenever I like, even if the car is off. The wire that we are cutting leads to the BCM which is what cuts the power to the fogs when high beams come on, which is the main reason I wanted to do this mod.

I fed the wire through the main wiring grommet that is located behind your brake/gas pedals. Quite easy though you'll likely need to remove the battery to get access from the engine bay side. For the relay in the fuse box i just bent pin 86 to a 90 degree angle and attached a spade connector...

I'm running LED fogs with no issues. Similar setup to what you've posted. There is a potential depth issue with the stock heat shield (not sure what its called) inside the fog housing. In my case this needed to be cut and pulled out through the bulb hole. It was not easy.

If anyone was interested in doing this mod themselves I eventually figured out how to do it myself. This brown wire from the indicator/light stalk can be cut and re-wired through the firewall straight to pin 86 on the Fog light relay in the engine bay (I bent the pin to connect a spade...

Hey guys! Im looking for a thread or some wiring information to be able to do this on my 2014 GT. I found this thread for another vehicle (09 CX-9) but not sure if the wire colours would be the same:

2014 GT light bar installation was a breeze! Put some hella horns in there while I had the bar off too. <a href="https://ibb.co/478pgVW"><img src="https://i.ibb.co/W6kfp2n/fullsizeoutput-52c2.jpg" alt="fullsizeoutput-52c2" border="0"></a> <a href="https://ibb.co/h943rZD"><img...