Search results

FWIW, my Aerogauge shows no improvement in the charge temp. reading with the cover off versus on doing a 10 minute same conditions run.

I guess I'm up the shitter since I didn't fill out my survey either...better not to say anything and not screw up the saleperson's record than to tell MazdaNA what I thought of my new Speed3 being delivered with the prep man's porno rap CD still in the player and no inspection sticker/inspection...

Did you happen to find out the build date or VIN's involved with your 08 reflash?

Rule of thumb on the motorcycle racetrack was to set a cold pressure which than showed an increase of 10% when hot...for ex., 36 cold...39.6 when hot. If hot psi is too low, make the tire softer cold and viceversa.

Patty has gone to England to work the assembly line so her Distributors here in the States will actually have a Forge part to sell !! (-:

I quit, keep your BOV.

Hell, this guy won't respond either !

Maybe he took off for the Easter Holiday. Certainly would make a potential buyer think twice about dealing with this type of situation and what other aggravations await.

2 PM's and 1 email, starting an hour after you posted...haven't heard anything back.

Jesse..just out of curiousity, who did you order that BPV from ?

I'll take that link to the independent foglight DIY !!

PM'd you about availability of the 2nd BPV...

Reason Forge has diameter of hose fittings a bit too small for the MS3 "dedicated" BPV...need new worm clamps to make them tight ? Just curious.

I too have no problem with rubbing with my RX8 rims wearing new 225/45-18 S0-3 Pole Positions, even with 2 people in the backseat. If you have rub in turns only, a stiffer rear swaybar may help you out.

I presume this was for a stock displacement MS3...was a 5gph nozzle the size recommended?. Seems on the large size for a 2.3 liter motor unless equipped with a huge turbo. Does a set of instructions come with the kit or should I ask DevilsOwn or go to their website ? THX

3M industrial strength double-sided tape ( I got mine at WallyWorld) will resist summer heat and is as close to permanent as it gets. You need a heat gun, dental floss to remove and than some gentle alcohol scrub to remove the residual adhesive or the adhesive remover Griot's garage sells...

How does one set/adjust a hybrid BOV like the TurboXS for example ? Do they come from the supplier with boxed instructions/suggestions ? THX, Craig

Where does one get the Prosport pod shown above?

Wouldn't the A pillar guages be a bit of a safety hazard in the event that the curtain airbags blow ?

Not the exact size I wanted but OK for my RX8 rims...TireRack has Potenza S0-3 Pole Positions in 225/45-18 for $115/each while they last..mine just arrived. Have had them before..a good summer tire and also great in the rain..better than the RE-50's...larger grooves for water dispersion and...