Search results

let me guess, the 6/32nd tires were on the front last year

well you live in Arizona, he lives in Canada - RUST

in most cases, a brake warning light indicates low brake fluid, which is often a result of worn brake pads.

try cleaning the MAFS, the MAFS is right next to the airbox https://www.youtube.com/watch?v=JsyJS2cCb9g

A common reason air bag warning lights come on is because something is interfering with the seat belt switch the sensor that detects if the belt is properly fastened

no aftermarket headlights out there for your vehicle. However there is a brand new passenger side headlight on ebay for 525 if what you need is the passenger side

Are the battery terminals clean and tight? Or it also could be your alternator. If you have a multimeter check for voltage at the battery posts with the car running, you should be getting around 14 volts, if you aren't it could mean your alternator is bad.

is there corrosion in the socket perhaps

Looks like sending unit is attached or connected to the fuel pump assembly which is inside the fuel tank itself. https://www.mazdaswag.com/oem-parts/mazda-fuel-tank-db4j42110b?origin=pla&gclid=EAIaIQobChMI2J6rxZOb3gIVFZ7ACh3PygrvEAQYAyABEgIqbfD_BwE...

funny how people never think to look in their Owner's Manual isn't it?

did you look in your Owner's Manual?

no many cars do not have clear coat on the door jambs from the factory

well look at you, you are becoming a regular grease monkey aren't ya

you will have to remove the wheel to get a good look at your brake pads to see how much of the pad is remaining, make sure you look at the inner brake pad too as they sometime can wear faster than the outer brake pad. https://www.youtube.com/watch?v=5u9lBRhAqco

Here is a short article about cleaning engine bays that might help http://www.motorweek.org/features/goss_garage/engine_cleaning

I don't know maybe try this place, they offer a color match guarantee http://www.automotivetouchup.com/touch-up-paint/mazda/2009/mazda5/

what does the flashing light look like or say?

some relays will have a locking tab that you have to pry on to remove them

oh what happened??

or maybe consider installing an oil pressure gauge