Search results

I also put in a new intake manifold gasket.

I have changed the injectors from my car to this car and all around.

Ok guys, I need some help. I have a mazda protege that has all the mods that a MSP would have. I am getting a miss on CYL 4 and I can not get it to quit missing. I am getting fuel and spark I also resurfaced the valves in that cyl because I had low compression and I thought where the engine...

Has nothing to do with the protege but I bought a Mac today, pretty exciting.

YOu need proper pics.

I should have one that would make a good candidate in a few weeks.

I did a head job in about 8 hours, I didnt take the timing off though I was able to get the cam gears off and hold tension up on belt to keep it on the crank and then remove the head and then put the gasket in a reinstall everything. However I wouldnt recommend doing it that way it was tricky...

Finally got my EGR hooked up two years after installing the 505zoom intake manifold so finally no more start up issues, also fixed a injector vac leak so that fixed my idel, installed new spark plugs so that fixed the issue of missing in really low RPMs and blowing the spark out in boost. Oh...

Check for a vac leak.

That routing is awesome!

I have a question, I am having a cyl 4 misfire and I cant figure out what it is. I have changed the plug, coil-pack, injector and checked for intake leaks. I put a 626 engine in this car so I had to change the exhaust cam for the cam sensor but I am wondering what the car would act like if I...

lol, yeah it was.

No joke the new mounts are awesome!

Just make it dump right after the seats toward the ground. Its after and away from the driver....

You cant clock the T25 unless you go to a external WGA or make a bracket to hold the current WGA.

I dont know what you are talking about, the emission system is always working so why would it not be "Ready"?

What would cause your car to idle real lean and then cause a misfire and cause the idle to bounce up and down?

Is your picture on it?

The stock turbo can not be rebuilt. You have to buy a new center rotating assembly.

I would figure out what is going on with your oil level.